10 Best
Peachtree Woodworking Woodworking Tools
-
Product Highlights- The head assembly is completely adjustable so it can be set to any angle that you need depending on the size and curve of your project. unlike most other bowl sander head assembly’s, our bowl sander has two steel bearings to provide you with super smooth mandrel rotation while sanding on your lathe. this also helps to reduce the chance of marking your wood since the san...
- The head assembly is also capable of accepting other size sanders as long as the mandrel/shank size is 1/4 inch in diameter. please be aware however that some manufacturers say 1/4 inch in diameter when in actuality the diameter is either smaller or slightly larger. 3 brass bushings of varying depths are included to make fitting sanders with different length mandrels/sh...
- When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. using a piece of hand held sandpaper can also be somewhat dangerous. our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe....
- It’s all about the pressure, or more like, its all about the light pressure and consistent technique. when sanding with the 2 inch bowl sander, applying too much pressure will likely produce some unsightly results. by applying light pressure and consistently moving the sander, you will achieve the results you are looking for and in a fraction of the time it typically ta...
- We have included the most common diameter sanding head with the bowl sander. this sander head is made from a foam material that gives just enough to provide you with wonderful looking results each time you sand your projects. this 2” head size works well on most bowl turning projects since it can work with larger or smaller work pieces. also included 10 ea. 80 grit, 10 ...
SHOWview product -
Product Highlights
- Each device in this kit is intentionally made in the safety orange color for high visibility when in use. this provides the user the ability to see exactly there hands are at during the cutting or milling process. being safety orange also allows for you to easily find the device when its not in its normal location.
- Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. the rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. the soles are also washable with with warm water. must let the rubber soles dry for 24 hours prior to using them again.
- This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. from the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
- The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. the push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. all five devices help prevent kickback and protect your fingers and han...
- The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
SHOWview product -
Product Highlights
- The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. the small thread-on rubber fitting has a 1 inch i.d. with a 1-3/16 inch taper up to 1-1/4 inch o.d. this kit will also work with popular tools like the k4 and the k5 pocke...
- Included inside the box: 1 each ten foot long 1-3/16 inch o.d. small diameter flexible hose, 1 each small flexible rubber thread-on fitting, 1 each large flexible rubber thread-on fitting and 1 each plug-in adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports.
- The smaller diameter 1-3/16" o.d. (outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. this gives you the ability to plug into different tools to add dust collection at a moments notice. the hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around yo...
- The large thread-on rubber fitting has a 1-1/2 inch i.d. with a 1-13/16 inch o.d. which works on many other power tools. the rigid plastic vacuum plug-in adaptor has a 2-1/4 inch taper up to 2-5/16 inch o.d. the adaptor is designed to plug into most standard workshop vacuum ports. the plug-in adaptor conveniently threads onto the power tool hose so it will never slip off!
- Important! check your power tool port dimensions: before placing an order, please check the inner and outer (i.d. and o.d.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. the i.d. and o.d. on the rubber end fittings and hose are approximate sizes and may slightly vary.
SHOWview product -
Product Highlights
- Loc-blocks also function as a project support by elevating your work, which provides easy access to every edge. what makes them work? anti-vibration, non-slip rubber pads on both the top and bottom of the blocks.
- Customize the layout of the blocks for your project - connect them together to create a straight, sturdy base for working narrow stock, or you can configure them to form a full 6¾” x 6¾” block for smaller projects. a must have for any size workshop.
- Loc-blocks make woodworking easy again by gripping both your work surface as well as your project without the use of any clamps. perfect for sanding, drilling, routing, finishing and a whole lot more.
- Our unique design allows the blocks to be placed at each of the corners of your material or they can be connected together by their interlocking dovetails.
- Available in packs of 4
SHOWview product -
Product Highlights
- Introducing the lightweight and easy to use fulton aluminum straight edge. use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. the fulton aluminum straight edge is the perfect for any workshop where accuracy is a must!
- Sometimes you need to have your work surface just right for your projects. whether you’re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. finding an economical tool to check for flatness used to be quite the challenge. not anymore!
- The aluminum straight edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. works exceptionally well where there is a seam to make sure both sides are absolutely even.
SHOWview product -
Product Highlights
- When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000. the more you get into to woodturning the more the reality of being organized comes into play. this couldn’t be more true than when it comes to our abrasives. this unique dispenser accepts 2” x 2” micro-mesh abrasive pads
- The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment. it can be mounted flat against a wall or it can be mounted to a table top. of course you don’t have to mount it at all.
- Pen, bottle stopper or even small goblet finishing just became a bit more enjoyable with the micro mesh soft touch sanding pads! starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it. this pack works extremely well when working with ca finishes leaving your work looking like it w...
- Specifically designed for the micro-mesh 2” x 2” 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. this works wonderfully well when step sanding your finished turning project. simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top.
- The dispenser measures 6” tall, 3¼” wide (at base tabs), 2-7/16” wide (actual abrasive holder) by 1½” deep. the colors on the grit chart and the colors of micro-mesh abrasives may vary slightly due to color shifts in the manufacturing process. package comes with 9 color coded micro mesh pads and 1 each galvanized steel dispenser.
SHOWview product -
Product Highlights
- Or you can reach for the correct grit inside the box dispenser and tear off just the right amount for your project. each grit roll is 1" wide and is flexible enough to be used on most any shape. these abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
- Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner.
- Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. we could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off.
- They also work on most any type of material and can be cut to any length needed.
- Each roll is made from hard to find j-weight cloth backed sandpaper. available in 150x, 240x, 320x, 400x, & 600x. the center opening of each roll is approximately 1-1/2".
SHOWview product
Coupon copied
