10 Best
Macbook Pro Rubber Cases
-
Product Highlights- Glue is required to properly install rubber feet as suggested by apple.apply a very small drop of glue on the bottom of the foot on the inner bottom case. do not spread the glue. do not use your finger to press the foot plug down. use the wooden end of a cotton swab to press the foot plug into place. lightly press and hold the foot in place for 30 seconds. clean any exc...
- Package includes: 4pcs bottom case rubber feet for macbook pro retina
- The adhesive on the rubber feet are not strong enough to stick the feet.
- Do not wipe the glue; use the cotton dry swab to absorb any excess glue. excess puddled glue may take hours to dry and may cause the bottom case to adhere to the logic board or interior cabling.
SHOWview product -
-
Product Highlights
- A1286 15" macbook pro "core 2 duo" 2.4 15" (08) macbook pro "core 2 duo" 2.53 15" (08) macbook pro "core 2 duo" 2.8 15" (09) macbook pro "core 2 duo" 2.53 15" (sd)(09) macbook pro "core 2 duo" 2.66 15" (09) macbook pro "core 2 duo" 2.66 15" (sd)(09) macbook pro "core 2 duo" 2.8 15" (sd)(09) macbook pro "core 2 duo" 2.93 15" (09) macbook pro "core 2 duo" 3.06 15" (sd)(09)
- Macbook pro "core i7" 2.8 17" mid-2010 macbook pro "core i7" 2.2 17" early 2011 macbook pro "core i7" 2.3 17" early 2011 macbook pro "core i7" 2.4 17" late 2011 macbook pro "core i7" 2.5 17" late 2011
- This item not for macbook retina ------- compatible model: macbook pro a1278 a1286 a1297 13" 15" 17" how to use: remove the bottom case and wipe the dropped stitch with a dry cloth to wipe off the dust, but do not get wet. heat the dropped stitch with a hair dryer, when it hotted, stick on the rubber foot directly. press until it is cooling, then turn over the bottom ca...
- A1297 17" macbook pro "core 2 duo" 2.66 17" (09) macbook pro "core 2 duo" 2.8 17" mid-2009 macbook pro "core 2 duo" 2.93 17" (09) macbook pro "core 2 duo" 3.06 17" mid-2009 macbook pro "core i5" 2.53 17" mid-2010 macbook pro "core i7" 2.66 17" mid-2010
- Compatible model no: mb466ll/a, mb467ll/a, mb467ll/a, mb991ll/a, mc374ll/a, mc375ll/a, mc700ll/a, md313ll/a, mc724ll/a, md314ll/a, md101ll/a, md102ll/a, mb470ll/a, mb471ll/a, mc118ll/a, mc026ll/a, mb985ll/a, mb986ll/a, mc371ll/a, mc372ll/a, mc373ll/a, mc721ll/a, mc723ll/a, md318ll/a, md322ll/a, md103ll/a, md104ll/a, mb604ll/a, mc226ll/a*,mc024ll/a, mc725ll/a, md311ll/a ...
SHOWview product -
-
Product Highlights
- Please kindly check the model number "a2xxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "a2442".
- Case dimension: 12.4 x 8.8 x 0.62 inch, compatible with macbook pro 14 inch a2442 m1 pro / m1 max with liquid retina xdr display & touch id with dimension: 12.31 x 8.71 x 0.61 inch (2022 2021 released).
- Designed only to be compatible with macbook pro 14 inch 2022 2021 release m1 pro / m1 max with liquid retina xdr display & touch id (model: a2442 - mkgp3ll/a, mkgq3ll/a, mkgr3ll/a, mkgt3ll/a). warning: this case is not compatible with other model laptops.
- No cut out design, transparency is different from color to color. fully vented for safe heat disbursement, fully access to all buttons and features. totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches.
- Otally removable, easy to put on and take off which can protect your laptop from scrapes and scratches.
SHOWview product -
Product Highlights
- Please kindly check the model number "a2xxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "a2779" or "a2442".
- Case dimension: 12.4 x 8.8 x 0.62 inch, compatible with macbook pro 14 inch a2442 m1 pro / m1 max with liquid retina xdr display & touch id with dimension: 12.31 x 8.71 x 0.61 inch (2022 2021 released).
- Designed only to be compatible with macbook pro 14 inch 2023 2022 2021 release m2 / m1 pro / max with liquid retina xdr display & touch id (models: a2779 & a2442 - mphe3ll/a, mphf3ll/a, mphg3ll/a, mphh3ll/a, mphj3ll/a, mphk3ll/a, mkgp3ll/a, mkgq3ll/a, mkgr3ll/a, mkgt3ll/a). warning: this case is not compatible with other model laptops.
- No cut out design, transparency is different from color to color. fully vented for safe heat disbursement, fully access to all buttons and features. totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches.
- Otally removable, easy to put on and take off which can protect your laptop from scrapes and scratches.
SHOWview product -
Product Highlights
- Please kindly check the model number "axxxx" on the back of the laptop before your purchase, make sure you choose the exact same model number as the listing title stated "a2338" or "a2289" or "a2251" or "a2159" or "a1989" or "a1706" or "a1708". no cut out design, transparency is different from color to color.
- Case dimension: 12 x 8.5 x 0.6 inch, compatible with macbook pro 13 inch with/without touch bar and touch id with dimension: 11.97 x 8.36 x 0.59 inch (2016 2017 2018 2019 2020 2021 2022 release). ultra slim light weight hard case has 8.9 oz in weight and 1.2 mm in thickness design almost adds no weight to your laptop.
- Compatibility:this case is only compatible with macbook pro 13 inch case 2021 2020 2019 2018 2017 2016 release m1 a2338/a2289/a2251/a2159/a1989/a1706/a1708.please kindly check the model number (axxxx) at the bottom of your macbook to determine the compatibility and refer to the attached picture to see if the model number is compatible with your macbook.
- No cut out design, transparency is different from color to color. fully vented for safe heat disbursement, fully access to all buttons and features. totally removable, easy to put on and take off that can protect your laptop from scrapes and scratches.
- Otally removable, easy to put on and take off which can protect your laptop from scrapes and scratches.
SHOWview product -
Product Highlights
- No logo cut out design, only 10 oz, you'll feel your macbook more natural in hand, ultra slim hard shell macbook cover with snap on design prevent your devices from unwanted cracks, scratches or damages.
- Trendsetting designs with high quality printing with everlasting colors, perfect for adding some extra flair to your macbook devices; with durable rubberized coating and rubberized feet to keep your laptop cool and firmly in place.
- [important!!!]: this hard shell cover case only for macbook pro 13 inch 2022/2021/2020/2019/2018/2017/2016 release a2338m2/m1/a2251/a2289/a2159/a1989/a1706/a1708 with touch bar and a1708 without touch bar). please kindly check the model number "a1xxx" on the back of the macbook before your purchase. not compatible with any macbook pro previous models.
- Fully vented for heat disbursement, fully access to all ports and features, plug your charger, cable or headset without removing the case.
- Including 2 matching keyboard covers (one compatible with 2016 2017 2018 2019 2020 release macbook pro 13 inch with touch bar models: a2159 a1989 a1706 and another compatible with 2020 release macbook pro 13 inch with touch bar models a2238m1 a2251 a2289) & 1 screen protector to protect your macbook keyboard & screen against spills and contaminates.
SHOWview product -
Product Highlights
- For apple macbook, quicksand hard cover grainy texture.
- Anti-tilt rubberized feet design, ensure your macbook stable.
- ⚠️【compatibility】designed only to be compatible with macbook pro 14-inch 2022 2021 release m1 pro / m1 max with liquid retina xdr display and touch id (model: a2442 - mkgp3ll/a, mkgq3ll/a, mkgr3ll/a, mkgt3ll/a). warning: this case is not compatible with other laptop models.
- Cut out design, shines through the case. design lets you open/close your macbook all the way and full access to all ports.
- Easy to install. light-weight hard shell with exquisite finish protects your macbook from scrapes and scratches
SHOWview product -
Product Highlights
- For apple macbook, quicksand hard cover grainy texture.
- Anti-tilt rubberized feet design, ensure your macbook stable.
- 【compatibility】designed only to be compatible with macbook pro 14-inch 2022 2021 release m1 pro / m1 max with liquid retina xdr display and touch id (model: a2442 - mkgp3ll/a, mkgq3ll/a, mkgr3ll/a, mkgt3ll/a). warning: this case is not compatible with other laptop models.
- Cut out design, shines through the case. design lets you open/close your macbook all the way and full access to all ports.
- Easy to install. light-weight hard shell with exquisite finish protects your macbook from scrapes and scratches
SHOWview product
Coupon copied
