8 Best
Hexacopters
-
Product Highlights- Using high strength compound pcb frame board, which makes wiring of escs and battery more easily.
- It can be applied for entertainment, aerial photography, fpv and other activities.
- F550 is a multi-rotor for all pilots for fun or ap.
- Made by advanced engineering material, super strong & smooth kit
SHOWview product -
Product Highlights
- For 6 arms, of course, there are more motors with a hexacopter meaning more power, meaning bigger batteries. this increase in batteries leads to an increase in flight time, which is also nice. due to these extra motors, a hexacopter is also more stable than your quadcopter equivalent.
- Made by advanced engineering material, super strong & smooth
- This is hexacopter frame which employs 6 arms to get into the air. there are several advantages of a hexacopter frame over a quadcopter one, justifying the extra price tag.
- Another great advantage of using hexacopters is if for any reason your quadcopter loses a motor, it goes down but with a hexacopter, on the other hand, in the majority of cases you will be able to land safely with one or maybe even two motors down; an extra inbuilt guarantee on your beloved copter.
SHOWview product -
Product Highlights
- Capacity: 3300mah; discharge rate: 35c; burst rate :50c; xt60 plug
- Don't throw it into fire. don't throw it into water.
- 1x 11.1v / 3300mah 3s lipo battery pack with xt60 connector
- Shangyi 11.1v 3300mah 3s 35c
- Don't over-charge, or over-discharge batteries.
- Compatible with: drone, quadcopter, rc plane helicopter, rc car
SHOWview product -
Product Highlights
- Easy to assemble and disassemble | durable | glass fiber main frame | polyamide nylon arms | features pre-threaded brass sleeves | in-built power distribution board | sturdy
- The f550 hexacopter frame is highly flexible frame during mounting of various components like flight controller, battery etc. the arms of the hexacopter frame are coloured as 2-red, 2-white and 2-black. these can guide you to fly in the right direction. due to its design, it allows the whole take-off weight to be controlled at about 1200-2400 gm. the frame can be used t...
- The robotbanao f550 hexacopter frame employs 6 arms to get into the air. the arms are made of ultra durable nylon. the main frame is constructed of glass fiber. it is made of advanced engineering materials, for maximum strength and least weight.
- Dimensions: arm size(lxw):220x40mm | motor mounting hole(diameter):3mm
- Material:glass fiber (main frame) and polyamide-nylon (arms) | symmetrical motor wheelbase:550mm | motor mount bolt holes:16/19mm | takeoff weight:1200-2400 grams
SHOWview product -
-
Product Highlights
- Do not charge the li-po battery unattended. do not over charge the li-po battery.
- Do not allow the li-po cells to overheat at any heat.
- Do not short circuit the lipo battery.
- Charge the lipo battery with the lipo battery charger only. inspect the lipo battery before charging and operating.
- Charge the li-po battery on a heat resistance surface along.
- Do not fully discharge the li-po battery.
SHOWview product -
Product Highlights
- Motor compact size | suitable for airplane, aircraft, quadcopter | on-board bec | better speed control | durable | lightweight esc low output resistance | enhances power stability | great battery life | good welding plug | welded t plug male to connect battery | low voltage protection mode | three 3.5 mm female banana welding head to connect motor end propellers perfect...
- The propellers are strong and lightweight which are well suited lower rpm motors and slow flying drone models. these are designed to provide the fine aerodynamic efficiency and great lifting capacity. the 30a bldc esc is made for quadcopters and multi-rotors. a2212 brushless 1400kv bldc motor is used in drones and other multirotor applications.
- The a2212 1400kv brushless motors for drone and simonk 30a esc is a popular combination of brushless dc motor with electronic speed controller (esc) for drones. we have coupled it with a 1045 propeller. the esc is made for quadcopters and multirotors. it provides a faster and better motor speed control and also gives better flight performance.
- Motor dimensions : 27.5 x 30 mm shaft diameter : 3.175 mm. esc size (lxwxh) : 45 x 24 x 11 mm propeller length : 10 inches
- Motor kv : 1400 rpm : 980 rpm/v lipo batteries : 2s-3s free load current : 2.5a maximum efficiency : 80% propellers number of propellers : 4 propellers material : abs and glass fiber plastic pitch : 4.5 inches per revolution thrust @ 3s with 1045 propeller : 800gms approx esc current : 30a bec : 3a constant current : 30a max 40a < 10s cells : 2-3 li-poly ni-mh : 4-10 ce...
SHOWview product
Coupon copied
