10 Best
32 Bit 3d Printer Boards
-
Product Highlights- Powerful and versatile: the main board adopt esp32 wroom 32u module, embedded dual core 32 bit high speed mcu, the clock is up to 240mhz. and integrate wifi, bluetooth module, update firmware through usb, can connect wifi and web page to control printing.
- 8m byte chip: in addition, the module has a built in 8m byte flash memory chip, which provides effective protection for more application scenarios.
- 32 bit microprocessor: built in esp32 dowd v3 chip, for xtensa dual core 32 bit lx6 microprocessor, supporting clock frequency up to 240mhz.
- Support various screen: this is a 3d printer main control board with onboard esp32 wifi, supports for marlin2.0 firmware, in addition to ordinary lcd2004, 12864 screen, also supports for mks mini12864v3, and for mkstft serial screen.
- Back emf protection: vexp has designed a protection circuit for the back emf generated by the stepper motor, which greatly reduces the damage to the motor driver.
SHOWview product -
Product Highlights
- Multipurpose: reserve bltouch interface servos and probe for easy use of bl touch, i2c, spi, wifi interfaces for additional diy. external dc5v power module can be plugged in to supply power to tft screen, bltouch, neopixel.
- Package contents: 1 x bigtreetech skr v1.4 turbo 32 bit control board smoothie board & marlin open source skr v1.4
- Features: bigtreetech skr v1.4 turbo using 32-bit 120mhz arm-class cortex-m3 series lpc1769 main control chip, the performance is greatly improved;1-way cnc fan,3-way frequent fans.dual z-axis interface, eliminating the trouble of external drive expansion module;
- Tmc2209: the tmc2209 stepper driver is ultra-quiet mode. module supports large area of heat dissipation pad for reduced temperature of the driver when it is working. tmc2209--prevent motor shake;support stall detection;support step / dir and uart mode.
- Customer service: customer's satisfaction is our ultimate goal! if there are any problems with our products, contact us and we would be very happy to solve your problems.
SHOWview product -
Product Highlights
- ⭐【cnc fan】because the fan on the skr mini e3 v2.0 control board is a cnc fan, you need to set the wind speed before using it. (note: v2.0 version of the fan is not ready to use after power on).
- ⭐【upgrade features】support bltouch, filament detection, power-off resume, automatic shutdown, etc .; increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- ⭐【main control chip features】this new skr mini e3 v2.0 motherboard uses the stm32f103ret6 main control chip, and its flash memory size is 512k.
- ⭐【hot-bed mosfet】the hot bed mos tube uses wsk220n04, low on-resistance, larger heat dissipation area, and reduce heat generation.
- ⭐【after-sales support】if you encounter any problems, please contact us via amazon as soon as possible. we have professional technical after-sales personnel to solve your problems;
SHOWview product -
Product Highlights
- Firmware flexibility: out of the box, the mainboard is preloaded with the ender 3 pro firmware. however, it can be customized to accommodate other printer models by flashing the appropriate firmware.
- Performance boost: the central microcontroller has undergone an upgrade from 8-bit to 32-bit architecture. this advancement results in significantly improved operational speed, reduced operational noise, and enhanced printing precision.
- Advanced features: the mainboard introduces valuable enhancements, including material breakage detection, which prevents printing failures due to material interruptions, and automatic leveling for simplified bed calibration.
- Enhanced features: introduces material breakage detection and automatic leveling. optimized circuitry solves heating problems and includes thermal runaway protection.
- Firmware update process: for v1.1.5 boards, firmware updates are accomplished using an isp cable. conversely, v4.2.7 boards require the firmware file to be copied onto a formatted sd card. inserting the card and power cord, followed by turning on the printer, completes the update process in approximately 10 seconds.
- Enhanced compatibility: the upgraded v4.2.7 motherboard is designed to be compatible with multiple 3d printer models, including ender 3, ender 3 pro, ender 3 v2, and ender 5. please notice: it only plug and play for ender 3 pro. if you want to install it on ender-3 v2 or ender-5, please flash ender-5 firmware. you can download firmware from official website.
SHOWview product -
Product Highlights
- Voltage carrier modulation of tmc driven chip minimizes current waves and eliminates noise effectively; low decibel and silent tmc controller makes the sound of mainboard running below 50db.
- Equipped with the imported control chip, control and drive, faster run speed, more sensitive control system, higher printing precise, stronger performance.
- Improved stability and increased board performance for high quality 3d printing
- Self-developed motherboard with strong anti-interference; special power management chip, support 8-bit mcu, support 24v power input stability improvement; additional esd with high performance and low consumption.
- High quality mos tube, better heat dissipation; compact circuit combination, closed inductance, antioxidant, corrosion and high temperature resistance; stable working for hours.
- Complete function easy installation: mainboard supports automatic leveling and material break detection. easy to install, easy to diy.
SHOWview product -
-
Product Highlights
- Widely application: the upgraded cr touch bed leveling kit is compatible with creality ender 3 v2/ ender 3/ ender 3 pro/ender 5//ender 5s/ender 5pro and cr-10 3d printer. (note: only compatible with 32 bit v4.2.2/v4.2.7 mainboard 3d printers).
- Easy installation: 3 different kinds of mounting brackets allows for installation on multiple 3d printers. the cr-touch sensor is simple in structure, convenient for printing when connected. automatic compensation of z-axis so as to stable print.
- Creality official product: cr touch auto bed leveling sensor fulfilled simple structure and high precision.performs multi-point detection on the printing platform and records the height of each detection point.stable quality, long service life, and can be reused more than 100,000 times.
- Durable & strong compatibility: compatible with pei / sticker/ glass / metal bed.creality upgraded cr touch 3d printer auto bed leveling sensor kit works perfectly with any surface, especially the design of metal push pin allows for longer service life.
- After-sales service: if you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
SHOWview product -
Product Highlights
- This silent motherboard adopts tmc2225 drivers, which can reduce the stepper motor noise greatly.
- Marlin 2.0.1 (v1.0.1) and bootloader installed,the firmware can be modified with an usb cable. it does not need an isp cable and isp pinboard anymore.
- Creality upgraded v1.1.5 silent motherboard to v4.2.7 silent motherboard. v1.1.5 silent mother is 8 bit but v4.2.7 silent mainboard is 32 bit.
- Optimized circuit: enabling thermal runaway protection to effectively solve heating problems. could be used in combination with e/z/y/x drive axis.
SHOWview product
Coupon copied
