10 Best
Vhf Antenna Marines
-
Product Highlights- W/16.4ft(5m) rg58 low loss premium coaxial cable with pl259;
- Stainless steel l-bracket&u-bolts, it comes with u-bolts which can be used with the attached plate for pole mounting.
- Comes with mount and screws, easy to carry and install, the body of the vhf marine antenna makes it highly resilient to your boat, yacht etc use.
- Marine antenna vhf 156-163mhz, 2 dbi signal with up to 50w of power;
- Vhf rubber antenna designed for any 156-163mhz device for receivers, 156-163mhz antenna for 156-163mhz device receivers to improve signal in receiving and transmitting.
- The antenna does not come with mast pole mount; it comes with two u-bolt which can be used with the attached plate for pole mounting.
SHOWview product -
Product Highlights
- Vhf whip boat antenna designed for any 156-163mhz device for receivers, 156-163mhz antenna for 156-163mhz device receivers to improve signal in receiving and transmitting.
- The portable vhf antenna does not come with mast pole mount; it comes with two u-bolt which can be used with the attached plate for pole mounting.
- Vhf-marine antenna vhf 156-163mhz, 2.5 dbi signal with up to 50w of power; w/16.4ft(5m) rg58 low loss premium coaxial cable with pl259;
- Stainless steel l-bracket&u bolts, it comes with u-bolts which can be used with the attached plate for pole mounting.
- Comes with mount and screws, easy to carry and install, the body of the vhf marine antenna makes it highly resilient to your boat, yacht etc use
SHOWview product -
-
-
-
-
Product Highlights
- ✔ anti-corrosion materials: marine antenna mount made of precision cast 316 marine grade stainless steel, excellent seawater corrosion-resistant and heavy duty
- ✔ easy to installed: clamp-on rail ratchet base can be installed vertically or horizontally on the handrail of the boat. the ratchet can be adjusted 360 degrees, and can be easily fixed or released by turning the handle
- ✔ 316 stainless steel: marine grade 316 stainless steel, rust-proof, anti-oxidation and durable. highly polished to a beautiful mirror-like finis
- ✔ size:thread size: 1"-12 thread male; handle length: 115mm / 4.5 inches; rail mount fits both 7/8” and 1” (od) rails
- ✔ worry-free service: 24-hour customer supports,30-day money back guaranteed.
SHOWview product -
Product Highlights
- High quality material: marine antenna mount for boats adopt accuracy‑cast 316 marine grade stainless steel has durability in salt water environments, high accuracy help to provide the best performance
- Size: marine antenna mount can accept all 1in standard antenna threads. suitable for pipes/rails with diameters of 7/8in to 1in
- Rail mounting: this marine antenna mount stainless adopts rail installation, adjustable design, the upper ratchet wheel can adjust the angle of 360 degrees
- Polished surface: the marine antenna mounting bracket surface is polished and has a beautiful mirror-like appearance, and it is not easy to rust
- Compatible: marine antenna mount adapter is applicable stardard antenna thread: approx. 1in/25mm. applicable diameter of pipe/railing: approx. 22-25mm/0.8-1in
SHOWview product -
Product Highlights
- 【316 stainless steel】:tingzhigo marine vhf antenna mounts are made of 316 stainless steel. in humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.
- 【easy for installation】upper ratchet: when the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. once you have determined the angle you want, pull the handle down to hold it in place. lower ratchet: first, you loosen the screw in lower ratchet and you can adjust it to the angle you want. the lower ratchet has an adjustable a...
- 【size】: fits all standard 1-inch marine antennas. base measures 3.62x 2.52 inch.
- 【dual swiveling ratchet design】dual swiveling ratchet design, the marine vhf antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces.
- 【packaging】: 1x marine vhf antenna mount,4x screws,4 xbolts,4x nuts . we provide screws for you to install. you can choose the screws according to your actual situation. (screws are made of 316 stainless steel). before delivery, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation and fading will occur. ...
SHOWview product -
Product Highlights
- 【316 stainless steel】: constructed corrosion-resistant investment cast 316 stainless steel. in humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.
- 【packaging】: 1x antenna mount, 1x l shape hex allen wrench, 1x open-end wrench. we provide wrench for you to install.
- 【size】: base measures 1" - 14 thread male (standard). recommended for installation on 22mm（7/8" ) and 25.4 mm（1" ） vertical, horizontal or oblique rails.
- 【easy for installation】:this ratchet rail antenna base features a lever-action lay-down handle that makes lowering the antenna quick and easy. lever action laydown handle makes lowering antenna quick and easy for passing under bridges, storage, and trailering.
- 【guarantee】:before shipment, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation and fading will occur. please feel free to buy it. if there is any problem, please contact us, and we will try our best to solve your problem.
SHOWview product
Coupon copied
