10 Best
Uxcell Air Compressors
-
Product Highlights- This air compressor/tank pressure relief valve is a safeguard to protect the compressor from back pressure
- Thread the pressure release valve into the manifold and use a wrench to secure (add additional sealant if necessary) (always depressurize the tank before servicing an air compressor)
- 1/2" pt male threaded inlet connection; relief pressure preset to 0.78mpa (8 kgf/cm2); total valve size (l*w): 58 x 27mm (2.28" x 1.06")
- It is mainly installed in small air compressor systems, gas storage tank, air receiver tank, and other related applications
- Metal construction and stainless steel spring for corrosion resistance and lasting performance
SHOWview product -
Product Highlights
- Replacement piston ring set(included 2 x balance rings and 1 x seal ring).
- Provides better seal, improves performance, and decreases oil consumption.
- Ring inner diameter: 48mm/1.89inch
- The main job of piston rings is to seal the combustion chamber against the piston housing and to channel the heat from piston to cylinder.
- Note: get your air compressor shut down when change piston rings.
SHOWview product -
Product Highlights
- Material: the main body is made of aluminum alloy, which is not easy to wear and burst compares to plastic material. it can work in high temperature environment.
- Widely application: oil level sight glass used widely to check the oil level of the pump in the air compressor. the actual liquid level position screw oil in the oil tank can be placed on the tank sight glass to see, to judge from the outside to run screw oil meets the operating condition.
- Thread size: m30x1.5mm; overall size : 38 x 20mm/ 1.5" x 0.8" (d*t).
- Good sealing: the sealing is achieved with an o-ring on the periphery. o-ring is made of rubber material, which is resistant to high temperature, corrosion and oxidation. it can provide good sealing performance.
- Note: get your air compressor shut down and release the pressure when change oil level sight glass.
SHOWview product -
Product Highlights
- 90 degree right air compressor check valve.
- One thread connector is for tube connecting and the other thread connectors are for air pressure tank and compressor piston pump.
- Thread size: g1/8, g3/8, g1/2.
- Durable valve closes when air has been drained from the compressor head.
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SHOWview product -
Product Highlights
- The three threads are respectively for tube connecting, air pressure tank and compressor piston pump
- It is constructed with high strength brass with good corrosion resistance that doesn’t require too much maintenance
- Thread size: m10xm14xpt3/8. overall size (l*w*h): 44 x 37 x 36mm (1.73" x 1.46" x 1.42"). please check for compatibility before purchasing
- Great replacement for your old or broken check valve if it is leaking or not closing off the airflow
- Before replacing the valve, make sure the compressor is totally shut down and pressure is relieved completely
SHOWview product -
Product Highlights
- [application] - widely used for replacing the piston ring to the air compressor
- [instruction] - 1. disassemble the piston cylinder to remove the old air compressor piston ring in the state of decompression and pressure relief; 2. clean the piston cylinder and piston rod then replace the old piston ring with the new one; 3. put the components back in place and tighten in order;
- [size] - 68mm (2.68 inch) od, 48mm (1.89 inch) id, 0.8mm (0.03 inch) thickness
- [advantage] - the piston ring is characterized by high wear resistance, durable and long service life
- [note] - 1. please perform maintenance and parts replacement in the state of decompression and pressure relief; 2. please confirm the required size before ordering; 3. please check and tighten the relevant mounting screws every 1-2 weeks of operation;
SHOWview product -
Product Highlights
- [application] - widely used for replacing the piston ring to the air compressor
- [instruction] - 1. disassemble the piston cylinder to remove the old air compressor piston ring in the state of decompression and pressure relief; 2. clean the piston cylinder and piston rod then replace the old piston ring with the new one; 3. put the components back in place and tighten in order;
- [size] - 66mm (2.6 inch) od, 48mm (1.89 inch) id, 1mm (0.04 inch) thickness
- [advantage] - the piston ring is characterized by high wear resistance, durable and long service life
- [note] - 1. please confirm the required size before ordering; 2. perform maintenance and parts replacement in the state of decompression and pressure relief; 3. check and tighten the relevant mounting screws every 1-2 weeks of operation
SHOWview product -
Product Highlights
- [application] - widely used for replacing the piston ring to the air compressor
- [instruction] - 1. disassemble the piston cylinder to remove the old air compressor piston ring in the state of decompression and pressure relief; 2. clean the piston cylinder and piston rod then replace the old piston ring with the new one; 3. put the components back in place and tighten in order;
- [size] - 73mm (2.87 inch) od, 56mm (2.2 inch) id, 1mm (0.04 inch) thickness
- [advantage] - the piston ring is characterized by high wear resistance, durable and long service life
- [note] - 1. please confirm the required size before ordering; 2. perform maintenance and parts replacement in the state of decompression and pressure relief; 3. check and tighten the relevant mounting screws every 1-2 weeks of operation
SHOWview product -
Product Highlights
- The three threads are respectively for tube connecting, air pressure tank and compressor piston pump
- It is constructed with high strength brass with good corrosion resistance that doesn’t require too much maintenance
- Thread size: 1/2" g, 3/8" g, 1/8" g. overall size (l*w*h): 44.6 x 35.4 x 28.6mm (1.76" x 1.39" x 1.13"). please check for compatibility before purchasing
- Great replacement for your old or broken check valve if it is leaking or not closing off the airflow
- Before replacing the valve, make sure the compressor is totally shut down and pressure is relieved completely
SHOWview product -
Product Highlights
- The three threads are respectively for tube connecting, air pressure tank and compressor piston pump
- It is constructed with high strength metal with good corrosion resistance that doesn’t require too much maintenance
- Thread size: 1/2" bsp (20mm), 3/8" bsp (16mm), 1/8" bsp (10mm). overall size (l*w*h): 42 x 38 x 36mm (1.65" x 1.5" x 1.42"). please check for compatibility before purchasing
- Great replacement for your old or broken check valve if it is leaking or not closing off the airflow
- Before replacing the valve, make sure the compressor is totally shut down and pressure is relieved completely
SHOWview product
Coupon copied
