8 Best
Sump Pump Submersibles
-
Product Highlights- Applications *draining sewage water from hotels, houses, commercial buildings, complexes etc. *pumping waste water in industries *tunnels and mines *pumping sewage water from stock farm and manhole sewer *sewage treatment plants *pumping municipal sewage water *septic tanks. features : *heavy duty bearings *high efficiency copper wound motor *safe and quite operation *m...
SHOWview product -
-
Product Highlights
- Stainless steel shaft with carbon bush bearing. noise free operation
- Low power consumption upto 9a. discharge upto 2.5 liters per second
- Coil burn due to dry run or improper installation / usage are not covered under warranty
- Single phase ac 220v. total head 30 m (upto 100 feet). copper winding
- 5 meter cable provided with panel board, 1 no bend and instruction manual
- 1 + 1 year extended warranty (24 months). no warranty for panel board
SHOWview product -
Product Highlights
- Topping up the motor unscrew the brass plugs 1 and 2, fitted on top of the motor as shown in fig. 1 below, and fill the motor with pure drinking water till water overflows from the other filling hole. gently rock the motor to release air bubbles and further top up if necessary. then replace the two plugs.
- Use the eye bolts / lifting lugs for lifting / lowering the ows using appropriate equipment. keep the wire ropes remains tied for lifting of the pump set for future. to prevent the motor from getting exposed during pumping, ensure the suction strainer is fitted above the level of the motor. this is done by fitting one end of a bend to the pump suction flange and the str...
- Sd ows motors are provided with two separate 3 core pvc insulated flat cable, each of 3 meters length. repeat the procedure for both 3 core pvc flat cables from the motor to the two cables from the control panel.
- Checking rotation of ows power up the ows and observe the discharge from the pump. next interchange any two phase wires, power up the ows and observe the discharge from the pump. in case the discharge is more after interchanging any two phase wires, then the impeller is rotating in the correct direction within the volute casing. if the discharge after interchanging any ...
- Features designed for under submerged condition water applications all rotating parts are dynamically balanced for longer bearing life and vibration free smooth operation epoxy ceramic coated in the inner parts for rust free operation fitted with quality oil seal easy for installation and no platform required designed to withstand wide voltage fluctuations non overloadi...
- The brass plug 3 mounted on the bottom of the motor, is used for draining the water from within the motor. ensure all three brass plugs are tightened to prevent leakage of water from within the motor. check for leakages before lowering the ows. use prescribed pipe sizes as mentioned on the product name plate. check the level of silt at the bottom of the well. refer fig....
SHOWview product -
-
Product Highlights
- Application: draining sewage water from hotels, houses, commercial buildings, complexes etc, pumping waste water in industries, tunnels and mines, pumping sewage water from stock farm and manhole sewer, sewage treatment plants, pumping municipal sewage water, septic tanks.
- Sturdy built, high efficiency 0.5 hp single phase motor ; saves energy upto 70 %; durable sewage pump
- Specifications: voltage:220v-240~50hz, input power: 400w (0.5hp), max.submersible head: 4.5m, max.flow: 7500l/h, outlet: g1-1/4", ip grade: ipx8, switch: float switch
- Features: heavy-duty bearings. safe and quiet operation. most reliable and hard-wearing. multipurpose applications. easy and cost-effective serviceability.
- Package contents: 0.5 hp sewage pump
SHOWview product -
Product Highlights
- Applications: draining sewage water pump from hotels, houses, commercial buildings, complexes etc, pumping waste water in industries, tunnels and mines, pumping sewage water from stock farm and manhole sewer, sewage treatment plants, pumping municipal sewage water, septic tanks.
- Sturdy built, high efficiency 1 hp single phase motor ; saves energy upto 70 %; durable sewage pump
- Specifications: voltage:220v-240~50hz, input power: 750w (1.0hp), max.head: 7m, max.flow:12000l/h, outlet: g1-1/4", ip grade: ipx8, switch: float switch
- Features: heavy-duty bearings. safe and quiet operation. most reliable and hard-wearing. multipurpose applications. easy and cost-effective serviceability.
- Package contents: 1 hp sewage water drain pump
SHOWview product -
Product Highlights
- Extremely quiet operation. easy to use.
- Long lasting wear-proof ceramic shaft. suitable for fresh & salt water sym.
- Completely submersible motor. powerful operation. home & pond.
- Suction cups to fit any aquariums fish tank & other surface.
- Wp7000 - power 105w / f.max: 5500 l/h - multi purpose water lifting pump.
SHOWview product
Coupon copied
