7 Best
Stud Sensors
-
Product Highlights- Sequential leds and audible beeps indicate reading
- Backlit lcd screen to display sensor's readying, even in low light conditions
- Warranty: 6 month warranty provided by the manufacturer from date of purchase
- Wood or metal studs up to 1-1/2” (38 mm) through drywall live ac wires (120 volts ac) up to 2” (50 mm) through drywall metal scan mode up to 3” (76 mm) through drywall
- Marking channel with led identifies target and makes marking surfaces easy and accurate
- One pass center-find technology to locate stud centers
SHOWview product -
Product Highlights
- Easy: one mode finds it all! it finds wood beams, metal studs, pipes, live electrical wires, and the prosensor m70 stud finder auto-selects the most accurate mode for changes in material or depth. no toggling between standard-scan and deep-scan. also, no calibration is required. just press and hold the button to begin your scan. additionally, you can start over a stud, ...
- Durable: designed for all users from homeowners to diy enthusiasts to professionals, the prosensor m70 stud finder is accurate and durable. it saves you time while still being tough enough to withstand being dropped off a ladder or tossed into a toolbox.
- Accurate: more sensors = more accuracy. the prosensor m70 has 7 sensors and 7 enhanced precision leds. conventional stud finders have 1 or 2 sensors. with more sensors, franklin sensors stud finders are the market’s most precise and best stud finders. the prosensor m70 has a max detection depth of 1.5". the enhanced precision leds track the exact location of studs while...
- Shows the center and edges of studs simultaneously: the prosensor m70 saves you time by showing you more of what is behind the wall. it displays the center and edges of studs simultaneously, shows double studs and irregular configurations found in older homes that other stud finders cannot detect.
- Uses triple a batteries.
SHOWview product -
Product Highlights
- 5 detection modes: the upgraded 5 in 1 mode provides users with more detection needs. the stud scan features 5 mode: wood detection: 1/2 inch(13 cm), 1 inch (25 mm) and 1.5 inch (38 mm), metal scan (60 mm)and ac scan (51 mm). according to different material and wall thickness to choose proper mode can deliever a precision and fast detection.
- Auto calibration: calibration before every detection provides maximum reliability and accuracy. firstly place it flat on the wall, secondly, turn on the power button, then hold the scan button to start calibration, it is completed when the beep sound and screen shows disappear.
- High precision stud finder wall scanner: this stud finder is designed to detect studs, metal, wire on wall for more precise dilling work, upgrade multi-sense technology which can accurately and quickly find edges and center of metal, studs, joists, pipes, live ac wire behind walls, floors and ceilings.
- Lcd display: backlight lcd screen diplaying design, easy to read, when the device detects an object, it will beep continually and a peck shape will also display on the lcd screen. this wall scanner features a bright, backlit lcd display and a low battery indicator to remind you to change battery in time (not include 9v battery).
- Practical stud finder for drilling: whether you're drilling a hole on wall for hanging a picture, mounting a tv, renovating part of your home, stud finder is a must-have tool you need, easy operation, making the task completion easier. no matter professionals, homeowners, and diy enthusiasts, it must be the best choice.
SHOWview product -
Product Highlights
- 【led flashing light】 built in 6pcs bright led light beads, our solar deck lights provides bright white with slightly bluish light for your swimming pool, stairs, etc. protect you and your familie from the falling accident caused by the darkness of night.
- 【waterproo & durable 】the packing lots light made by durable aluminium material and can all kinds of outside bad weather conditions. the working temperature is -50℉-140℉. the recommended installation
- 【high efficient solar panles 】 the 2v/0.3w polycrystalline solar panel can convert up to 20% of the sunlight into electricity energy. built-in 600mah battery, it can be fully charged within only 6 hours and providing 24 hour continuous working time.
- 【ip68 weatherproof & resistant 】the dust resistant and water resistant. please be assured to use it outdoors without worrying about any bad weather. with aluminum alloy casing, the solar deck lights can withstand 25 tons pressure which has passed the professional compression test. it will not be damaged even the trucks passing through.
- 【on-off switch】 switch control avoid the situation that battery loss caused by being placed for too long. works out of the box
SHOWview product -
Product Highlights
- 💭[prevent interference:to ensure best performance from the stud sensor, keep your free hand at least 6 inches away from the unit and wall surface while testing or scanning surfaces
- 💭[wallpaper-there will be no difference in the function of the stud sensor on surfaces covered with wallpaper or fabric unless the coverings used contain metallic foil or fibers
- 💭[usage:the stud sensor uses electronic signals to locate the edges of studs or joists through drywall and plywood up to 3/4".once the edge of a stud has been detected, the stud sensor displays a red led and sounds an audible tone. a pencil notch allows you to easily note the stud edge on the wall
- 💭[conventional construction：doors and windows are commonly constructed with additional studs and headers for added stability. the stud sensor detects the edge of these studs and solid headers as a single, wide stud
- 💭[ceilings - when dealing with a rough surface such as a sprayed ceiling,utilize a piece of cardboard when scanning the surface.run through the calibration technique described earlier with the piece of cardboard too, to assure best performance of the unit. also, it is particularly important in this application to remember to keep your free hand away from the unit
SHOWview product -
Product Highlights
- 🥁[prevent interference:to ensure best performance from the stud sensor, keep your free hand at least 6 inches away from the unit and wall surface while testing or scanning surfaces
- 🥁[wallpaper-there will be no difference in the function of the stud sensor on surfaces covered with wallpaper or fabric unless the coverings used contain metallic foil or fibers
- 🥁[usage:the stud sensor uses electronic signals to locate the edges of studs or joists through drywall and plywood up to 3/4".once the edge of a stud has been detected, the stud sensor displays a red led and sounds an audible tone. a pencil notch allows you to easily note the stud edge on the wall
- 🥁[conventional construction：doors and windows are commonly constructed with additional studs and headers for added stability. the stud sensor detects the edge of these studs and solid headers as a single, wide stud
- 🥁[ceilings - when dealing with a rough surface such as a sprayed ceiling,utilize a piece of cardboard when scanning the surface.run through the calibration technique described earlier with the piece of cardboard too, to assure best performance of the unit. also, it is particularly important in this application to remember to keep your free hand away from the unit
SHOWview product -
Product Highlights
- 🥁[prevent interference:to ensure best performance from the stud sensor, keep your free hand at least 6 inches away from the unit and wall surface while testing or scanning surfaces
- 🥁[wallpaper-there will be no difference in the function of the stud sensor on surfaces covered with wallpaper or fabric unless the coverings used contain metallic foil or fibers
- 🥁[usage:the stud sensor uses electronic signals to locate the edges of studs or joists through drywall and plywood up to 3/4".once the edge of a stud has been detected, the stud sensor displays a red led and sounds an audible tone. a pencil notch allows you to easily note the stud edge on the wall
- 🥁[conventional construction：doors and windows are commonly constructed with additional studs and headers for added stability. the stud sensor detects the edge of these studs and solid headers as a single, wide stud
- 🥁[ceilings - when dealing with a rough surface such as a sprayed ceiling,utilize a piece of cardboard when scanning the surface.run through the calibration technique described earlier with the piece of cardboard too, to assure best performance of the unit. also, it is particularly important in this application to remember to keep your free hand away from the unit
SHOWview product
Coupon copied
