10 Best
Square Nose End Mills
-
Product Highlights- Carbide tip: tungsten carbide tip has high hardness, high strength, wear resistance. with good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Features: square end cut, 3-flute design. straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- Square nose end mill: cutting diameter: 6mm / 0.24"; cutting flute length: 15mm / 0.59"; straight shank diameter: 6mm / 0.24; overall length: 65mm / 2.56"; number of flutes: 3 flutes.
- Wide applications: suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. for shallow groove machining, side milling and finishing.
- Tips: use on cnc machining centers, milling machines, drilling machine, lathes and other high-speed cnc machine tools. the longer the length of the tool clamped by the chuck, the better. select an appropriate feed rate and cutting speed.
SHOWview product -
Product Highlights
- ★ wide applications --- suitable for creating flat-bottomed slots, pockets, or profiles. it is used for machining stainless steel, alloy steel, cast iron, hardened steel, non-ferrous metals, aluminum and plastics. (hrc45 cutting hardness)
- ★ p05 tungsten carbide --- provides excellent hardness, wear resistance, high strength, good toughness and heat resistance. altin multilayer coatings improve lubricity, reduce friction, and enhance hardness, wear resistance and overall tool life, and increase cutting speeds and feeds
- ★ square nose end mill size --- the end mill with 1mm / 0.04" cutting diameter; 3mm / 0.12" cutting length; 4mm / 0.16" shank diameter; 50mm / 2" total length; 4 flutes; 35 degree spiral angle.
- ★ease of use --- sharp square cutting edges allow for efficient, precise milling operations, and 4 flutes help improve chip evacuation and reduce the chance of clogging during machining. used with cnc milling machines, router machines, and engraving machines.
- ★ useful tips --- make sure it is securely seated and tightened. use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. excessive heat can affect tool life and performance.
SHOWview product -
Product Highlights
- ★ wide applications --- suitable for creating flat-bottomed slots, pockets, or profiles. it is used for machining stainless steel, alloy steel, cast iron, hardened steel, non-ferrous metals, aluminum and plastics. (hrc45 cutting hardness)
- ★ p05 tungsten carbide --- provides excellent hardness, wear resistance, high strength, good toughness and heat resistance. altin multilayer coatings improve lubricity, reduce friction, and enhance hardness, wear resistance and overall tool life, and increase cutting speeds and feeds
- ★ square nose end mill size --- the end mill with 3mm / 0.12" cutting diameter; 8mm / 0.31" cutting length; 4mm / 0.16" shank diameter; 50mm / 2" total length; 4 flutes; 35 degree spiral angle.
- ★ease of use --- sharp square cutting edges allow for efficient, precise milling operations, and 4 flutes help improve chip evacuation and reduce the chance of clogging during machining. used with cnc milling machines, router machines, and engraving machines.
- ★ useful tips --- make sure it is securely seated and tightened. use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. excessive heat can affect tool life and performance.
SHOWview product -
Product Highlights
- Carbide tip: tungsten carbide tip has high hardness, high strength, wear resistance. with good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Features: square end cut, 3-flute design. straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- Square nose end mill: cutting diameter: 12mm / 0.47"; cutting flute length: 15mm / 0.59"; straight shank diameter: 12mm / 0.47; overall length: 80mm / 3.15"; number of flutes: 3 flutes.
- Wide applications: suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. for shallow groove machining, side milling and finishing.
- Tips: use on cnc machining centers, milling machines, drilling machine, lathes and other high-speed cnc machine tools. the longer the length of the tool clamped by the chuck, the better. select an appropriate feed rate and cutting speed.
SHOWview product -
Product Highlights
- Wide applications: suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc. the clearance part is the same as the cutting diameter, specially designed for machining deep holes and deep grooves.
- Features: features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. sharp cutting edge provides smooth cutting. the altisin composite coating has high hardness, high wear resistance and high thermal stability.
- End mill: cutting diameter: 1mm / 0.039"; effective cutting length: 20mm / 0.79"; cutting edge length: 3mm / 0.12"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: hrc60. used for groove machining, side milling and finishing.
- Solid carbide: made of super fine grain carbide, it has high hardness (hrc92), high strength, and wear resistance. with good milling and cutting performance, carbide can run at higher speed than high-speed steel. the passivation treatment greatly increases corrosion resistance and wear resistance.
- Tips: use on cnc machining centers, cnc machine tools, precision engraving machines and other equipment. the longer the length of the tool clamped by the chuck, the better. select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
SHOWview product -
Product Highlights
- Wide applications: suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc. the clearance part is the same as the cutting diameter, specially designed for machining deep holes and deep grooves.
- Features: features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. sharp cutting edge provides smooth cutting. the altisin composite coating has high hardness, high wear resistance and high thermal stability.
- End mill: cutting diameter: 0.6mm / 0.024"; effective cutting length: 10mm / 0.39"; cutting edge length: 2mm / 0.08"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: hrc60. used for groove machining, side milling and finishing.
- Solid carbide: made of super fine grain carbide, it has high hardness (hrc92), high strength, and wear resistance. with good milling and cutting performance, carbide can run at higher speed than high-speed steel. the passivation treatment greatly increases corrosion resistance and wear resistance.
- Tips: use on cnc machining centers, cnc machine tools, precision engraving machines and other equipment. the longer the length of the tool clamped by the chuck, the better. select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
SHOWview product -
Product Highlights
- Solid carbide tool: m30 carbide ball nose end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. carbide material with good milling and cutting performance. carbide can run at higher speed than high-speed steel.
- Features: square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- Square nose end mill: cutting diameter: 2mm / 0.08"; cutting flute length: 6mm / 0.24"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: hrc55.
- Wide applications: suitable for cutting aluminum, copper, plastic, etc.. for shallow groove machining, side milling and finishing. use on cnc machining centers, engraving machines and other high-speed cnc machine tools.
- Tips: the longer the length of the tool clamped by the chuck, the better. combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
SHOWview product -
Product Highlights
- Wide applications: suitable for cutting materials with hardness below hrc55, such as aluminum, aluminum alloy, copper, magnesium alloy. the clearance part is the same as the cutting diameter, specially designed for machining deep holes and deep grooves.
- Features: features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. sharp cutting edge provides smooth cutting. features just the base substrate without any coatings, good for general purpose cutting.
- End mill: cutting diameter: 1.5mm / 0.059"; effective cutting length: 6mm / 0.24"; cutting edge length: 4.5mm / 0.18"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: hrc55. used for groove machining, side milling and finishing.
- Solid carbide: made of fine grain carbide, it has high hardness (hrc90), high strength, and wear resistance. with good milling and cutting performance, carbide can run at higher speed than high-speed steel. the passivation treatment greatly increases corrosion resistance and wear resistance.
- Tips: use on cnc machining centers, cnc machine tools, precision engraving machines and other equipment. the longer the length of the tool clamped by the chuck, the better. select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
SHOWview product -
Product Highlights
- Wide applications: suitable for cutting materials with hardness below hrc55, such as aluminum, aluminum alloy, copper, magnesium alloy. the clearance part is the same as the cutting diameter, specially designed for machining deep holes and deep grooves.
- Features: features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. sharp cutting edge provides smooth cutting. features just the base substrate without any coatings, good for general purpose cutting.
- End mill: cutting diameter: 1.5mm / 0.059"; effective cutting length: 18mm / 0.71"; cutting edge length: 4mm / 0.16"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: hrc55. used for groove machining, side milling and finishing.
- Solid carbide: made of fine grain carbide, it has high hardness (hrc90), high strength, and wear resistance. with good milling and cutting performance, carbide can run at higher speed than high-speed steel. the passivation treatment greatly increases corrosion resistance and wear resistance.
- Tips: use on cnc machining centers, cnc machine tools, precision engraving machines and other equipment. the longer the length of the tool clamped by the chuck, the better. select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
SHOWview product -
Product Highlights
- Size: 1/8''+5/32''+3/16''+1/4''+5/16''+3/8''+1/2'', total 8 sizes, different sizes can meet your different needs.
- Wide application: widely used in hardness from aluminium, cast iron, brass, copper, magnesium alloy, plastics under hrc32(hra66),or more processing soft materials., not suitable for very hard metal.
- Material: hss, flute: 4 flute end mill bits
- Feature: 4 flute, full grinded, high abrasion resistance, obtain accuracy and fine finish
SHOWview product
Coupon copied
