10 Best
Soldering Suckers
-
Product Highlights- ✔️excellent quality : our no-clean desoldering wick wire is made of ultra-thin 100% pure braided copper. free impurity and oxide-free desoldering wick that contains 2% rma (rosin midly activated) flux.
- ✔️low residue : no-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, rohs compliant. no need to clean surface after desoldering process.
- ✔️scope of application: for all kind of electronic circuit boards, replace faulty components, clean joints and pads, remove excess solder, correct solder bridges, clean excess solder from pcb during solder, desolder, rework or reflow process.
- ✔️easy to use: the desoldering wicks can provide an easier way to correct mistakes on small pcb boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Package include : osft solder wick braid copper wire
- ✔️enought quantity: the package includes high quality desoldering wick wire 1.5m long x 2.5 mm width, twice as more as standard solder wicks. its fine geometrical design makes the molten solder wicks away quickly and efficiently. enough for your daily work needs.
SHOWview product -
-
-
-
Product Highlights
- Specifications::::: range of temperature regulation: 1℃ ||||| scope of application: tin removal ||||| net weight: approx. 40g ||||| length: approx. 200mm/7.87'' ||||| material: half aluminum half plastic / whole aluminum ||||| maximum suction: 30 ||||| color: blue
- Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity. ||||| 5. head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin suctioner.
- Package includes: 1 x desoldering pump
- Operation manual ::::: 1. put the tin suctioner piston downward pressure to get stuck. ||||| 2. heating solder joints to solder melting with electric soldering iron. ||||| 3. remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button. ||||| 4. if it is not clean at one time and can be repeated many times.
- Using skills::::: 1. to ensure good solder sucker piston seal. before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good. ||||| 2. the aperture tin suctioner heads are of different sizes, select the appropriate specifications. ||||| 3. tin suctioner he...
- Note: please allow 1-3 cm differs due to manual measurement. due to the different display and different light, the picture may not show the actual color of the item. thanks for your understanding.
SHOWview product -
Product Highlights
- One-handed solder sucker with powerful suction whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome
- Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity. ||||| 5. head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin suctioner.
- Hanbon 83101 tin suction pump using skills: 1. to ensure good solder sucker piston seal. before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good. 2. the aperture tin suctioner heads are of different sizes, select the appropriate specifications. 3. ti...
- Widely used solder remover the desoldering wick and desoldering pump can be used to correct mistakes with small boards on pcbs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard, clean alloy on smd components and more the body is made...
SHOWview product -
Product Highlights
- After a few minutes connecting to the power used by a rear cap hear " beep" ,then you can start.
- Features: suction soldering two functions , improve work efficiency , energy saving, safe, reliable, suction is particularly strong. available for one-handed operation , the work is simple, durable.
- Methods for cleaning up after completely cooled , remove the black decorative circle , press the button and spin the seat from the left , you can remove the tin. operating voltage: 220v/36w package includes: 1 x desoldering pump (we will send you a plug adapter according to your country
SHOWview product -
Product Highlights
- 6.30w solder iron is ideal for hobbies, kits, radios, and electronics work. 7. operating voltage: 220v/30w package includes: 1 x 220v 30w electric vacuum solder sucker desoldering pump iron gun welding tool
- Features: 1. this soldering iron solder tool adopts durable and ceramic heater. 2. light weight with a heat resistant plastic handle. 3. possessing fast and heat dissipation, withstanding high voltage and temperatures such good characteristics so that hard to burn out the heater.
SHOWview product -
-
Product Highlights
- After a few minutes connecting to the power used by a rear cap hear " beep" ,then you can start.
- Features: suction soldering two functions , improve work efficiency , energy saving, safe, reliable, suction is particularly strong. available for one-handed operation , the work is simple, durable.
- Methods for cleaning up after completely cooled , remove the black decorative circle , press the button and spin the seat from the left , you can remove the tin. operating voltage: 220v/36w package includes: 1 x desoldering pump (we will send you a plug adapter according to your country
SHOWview product
Coupon copied
