10 Best
Solar Mounting Systems
-
Product Highlights- Compatible equipment: solar panel mounting bracket clamps compatible with all kinds of aluminum photovoltaic guide rail(roof, ground, shed), c steel, u steel and h channel steel, etc.
- Practical: this product is a thunder protection grounding component that collects the static electricity from photovoltaic modules and photovoltaic support and leads to the ground through a grounding copper cable
- Quick installation: solar module mounting clamps are easy to install, no need for many tools, allows a variety of ground conduction installation
- Working principle: this part is made up of thunder protection grounding pins and stainless steel screws. when the screw is locked, the spike on the thunder protection grounding blade will pierce the anodized layer of the aluminum guide or any other conductive metal structure
- 10pcs: the package contain a total of 10pcs grounding clip, enough for you to replace and use, very convenient to use
SHOWview product -
Product Highlights
- Made of galvanized iron which lasts for 35+ years
- 2 panel stand, 300 watts - 550 watts
- Solarware solar panel mounting roof-top stand, complete diy structure (for 2x spv of 300-550watts size)
- Easy to install (do it yourself) face towards sse or south
- Contents: 2x front leg height, 2x back leg height, 2x rafter, 4x base plate, with nut-bolts
SHOWview product -
-
Product Highlights
- Quality material: these solar panel mounting brackets end clamp are made of quality aluminum with good luster and compact structure, the surface is produced by fine manufacturing technology, not easy to rust or corrosion, so they can serve you for a long time
- Easy to install: these adjustable end clamps size can be adjusted according to the different solar panels, you only need to install it in the target position, saving your time and energy, which is convenient for you to install
- What you will receives: you will receive a package including 10 pieces of solar panel adjustable end clamps, the quantity is enough to meet your daily use and replacement needs, and bring you a lot of convenience
- Exquisite workmanship: solar panel adjustable end clamps with accurate design, z adjustable mounting brackets can work for 50w to 150w panels, ban make the connection between the panel firmly, and the aluminium framed panel clamps for fixing panel on the rails
- Wide range of applications: designed with an adjustable end clamp design, these aluminum adjustable solar end clamps can be adjusted for different solar panels, suitable for frame solar panels ranging from 35 mm/ 1 3/8 inches to 50 mm/ 1 15/16 inches
SHOWview product -
Product Highlights
- Easy to install : effectively improve the installation efficiency of photovoltaic system projects. pre-assembled without much tools. can be firmly earthed with aluminium rails.
- Grounding lug standard solar panel grounding clip for solar mounting system, solar module mounting bracket, clamps, grounding eyelets, fixings, photovoltaic support.
- The earthing clamps for solar panels connect the static connection cables generated by the solar panels to the ground, which is a standard grounding clamp for solar panels for solar mounting systems.
- Material : the solar panel grounding clamp is made of aluminium material with smooth edges, which is corrosion-resistant, rust-resistant, wear-resistant, uv-resistant, high-frequency insulated, not affected by harsh weather such as high temperatures and is durable to use.
- Widely used : the solar rail end clamp adapter plates are widely used in photovoltaic power generation systems for flat roofs and many other applications, roofs, floors, carports.
SHOWview product -
Product Highlights
- 【complete kit】 6pcs 200mm solar panel mounting rails + 3pcs 30mm/35mm end clamps +3pcs 30mm/35mm middle clamps, including complete accessories for mounting (fixing screws and rubber pad). set of 6, the quantity is enough to cover your daily use and replacement needs.
- 【innovative two-hole end clamp】the z-shaped edge clamp is divided into long end and short end, and 2 fixing holes are pre-drilled. choose the shorter side of the end clip for mounting solar panels with 30mm/1.18" frame, and choose the longer side of the end clip for mounting solar panels with 35mm/1.38" frame.
- 【perfect after-sales service】if you have questions and problems, we will provide the perfect solution.
- 【improved & practical design】 z-shaped end clamps and t-shaped middle clamps for better fit and hold of solar panel. the surface of the mounting rails is machine punched and polished for a smooth and burr-free surface, and the grooved strips provide a stronger connection with the solar panel.
- 【permium material, durable and long lasting】 anbte solar panel short rail & mounting clamp are made of aluminum alloy, which with lightweight, large load capacity and strong corrosion resistance, suitable for a variety of outdoor environments.
- 【high quality accessories】 the mounting screws are made of 304 stainless steel, which has the advantages of corrosion resistance, and are rust and weather resistant, not easy to break or deform. and the rubber pad made of epdm material can prevent water penetration.
SHOWview product -
Product Highlights
- Adjustable end clip design - can be adjusted according to different sizes of solar panels, suitable for frame solar panels from 1.38 inches (35mm) to 1.97 inches (50mm)
- Easy to install: these adjustable end clip sizes can be adjusted to different solar panels, you just need to install it at the target location, saving your time and effort
- Premium material- the solar panel mounting brackets are made of high-quality aluminum material, compact in structure, and the surface is produced with a fine manufacturing process, with a superior gloss, not easy to rust or corrode.
- Exquisite workmanship - the solar panel adjustable end clips are precisely designed to effectively secure the panel to the track.
- What you get - the solar panel mount come in a pack of 10, enough for daily use and replacement, bringing a lot of convenience and less hassle.
SHOWview product -
Product Highlights
- Compatible equipment: this solar mounting system metal grounding clip is compatible with all kinds of aluminum photovoltaic guide rail(roof, ground, shed), c steel, u steel and h channel steel, etc. the grounding lug feature ensures the safe and efficient transfer of electricity
- Quick installation: easy to install, no need for many tools, allows a variety of ground conduction installation. these solar module mounting clamps are essential for any solar power project, and are made with high-quality materials to withstand various weather conditions
- This part is made up of thunder protection grounding pins and stainless steel screws. when the screw is locked, the spike on the thunder protection grounding blade will pierce the anodized layer of the aluminum guide or any other conductive metal structure surface, so that the metal structure that can contact each other forms an air tight electrostatic connection, and t...
- Thunder protection component: this solar panel grounding lug is a thunder protection grounding component that collects the static electricity from photovoltaic modules and photovoltaic support and leads to the ground through a grounding copper cable
- 10pcs in total: the package contain a total of 10pcs grounding clip, enough for you to replace and use, very convenient. it provides a reliable and sturdy support system for solar modules, ensuring optimal performance and longevity
SHOWview product -
Product Highlights
- -【heavy duty brackets】made out of 3mm aluminum anodized(rust free), lightweight and reasonable sturdy,it holds up to high winds.it’s made to be bolted to the frame of a rigid panel. the flexible panel needs to be secured to the frame to be used with this brackets set.attention:wearing gloves protects your hands from scratching of brackets rails’sharp corners during inst...
- -【length of brackets】4*leg bracket : 22*1*2 inch,2*fixed bracket：11.4*1*0.8 inch(there is very little measurement error).the solar panel brackets kit will accommodate 1 compatible panel up to 100 watt,fits multiple series of panels.there are plenty of slots on the arms for installation of panels of different sizes and adjustment of angle for seasonal optimization.
- - 【solar panel mount】solar panel mounts are used to secure your solar panels array to a surface and can also be used to optimize your panel’s energy production through its angle and direction. tilt brackets can be easily adjusted from flat to almost 90 degrees at highest position.gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead o...
- - 【easy to install】bracket rack with pre-existing holes,easy bolt-on, no-drill installation.solar panel stand kit come with necessary fastener hardware,included 4 module bolts,4 flange nuts,6 5/16＂wing bolts, 6 5/16＂wing nuts.be happy and diy your solar panel mounting system.
- -【application】rack mounting brackets set is ideal for mounting any solar panels to flat surfaces such as rv/bus/caravan/trailer/boat roof tops, sheds, garages, ground,wall etc.
SHOWview product -
Product Highlights
- 4 panel stand, to mount 300 watts - 550 watts panels [ vertically / approx 2250watts ]
- Contents: 3x back legs, 3x front legs, 3x side rafter, 2x channel, nut-bolts, 6x base plates
- Made of galvanized iron which lasts for 35 to 40 years
- Easy to install (do it yourself) face towards sse or south
SHOWview product
Coupon copied
