8 Best
Solar Controllers
-
Product Highlights- Charging current: 20 amp; battery voltage: 12v/24v (auto selection);
- Inbuilt low volatge disconnect ; automatic battery selection; usb port for dc load connection
- Package contains : pack of 1, solar charge controller
- Material : plastic; colour: silver; max. supported panel power (wp) 400wp(12v), 800wp(24v)
- Product dimension-(lxwxh) :40x60x135 (mm); weight: 0.35kg
SHOWview product -
Product Highlights
- Dimensions: 16 x 12 x 5.5 (cm)
- Packer: luminous power technologies pvt. ltd. , plot no. 150, sector-44, gurugram haryana-122003
- Package contains : pack of 1, 10amp solar charge controller
- Material: plastic; color: blue; max solar panel voltage (v): 200wp(12v), 400wp(24v);
- Ratings: 10 amp; battery voltage: 12v/24v
- Inbuilt low volatge disconnect ; automatic battery selection; usb port for dc load connection
SHOWview product -
Product Highlights
- ✅ prevents overcharging, over-discharging, and reverse current flow for battery protection
- ✅ equipped with intuitive lcd display for easy monitoring of charging status and battery parameters
- ✅ efficiently regulates solar panel output to charge batteries safely and effectively
- ✅ compatible with various battery types including lead-acid, gel, and lithium-ion
- ✅ easy to install and operate, with user-friendly interface
SHOWview product -
Product Highlights
- Usb port for mobile charging
- Package contents:1 solar charge controller
- Automatic selection of 12v /24v battery, 98 percent efficiency, fuse-less electronic and software controlled protections
- Elegant and ergonomic design
- Option of smf and lead acid battery selection, load controller with and dusk to dawn feature
SHOWview product -
-
Product Highlights
- Protection level: with overload, short circuit, open-circuit and reverse protection, the device will protect your battery and will increase the battery life.
- Connection: connect the battery first with the controller and then the panel. connections should be in this sequence else the controller will not work.
- Solar charge controller: regulates battery charging when connected between battery and solar panel. on the lcd you can see the charging status.
- Battery types: this updated controller is suitable for all battery types. make sure to select the correct battery type i.e b1 for lead-acid, b2 for li-ion, b3 lifepo.
- Note: 12v panel will work with 12v battery only and 24v panel will require 24v battery. you can set float voltage, discharge reconnect, discharge stop and work mode.
SHOWview product -
Product Highlights
- The battery cable should be as short as possible to minimize loss
- Make sure your battery has enough voltage for the controller to recognize the battery type before first installation
- Note: this 10a solar regulator is only suitable for lead-acid batteries: open, agm, gel. not suitable for ni-mh batteries, lithium ions or other batteries. in order to protect the service life of the battery, once the battery voltage drops below 8v, the solar controller will automatically shut down.
- The regulator is only suitable for lead acid batteries: open,agm, gel
- The charge regulator is only suitable for regulating solar modules. never connect another charging source to the charge regulator
SHOWview product
Coupon copied
