10 Best
Rv Antennas
-
Product Highlights- Shark antenna design is amazing, concision and modern, mak-ing your car cool and distinctive.
- Easily on installation, no drilling required.
- Univ-ersal replacement part for replacing your existing mast and cover the antenna base that is on your vehicle, if the size of your original antenna's base is smaller than the bottom dimension (approx 3.19" x 2.48"), this shark antenna will fit your car.
- Shark fin antenna, enhance the vehicle's signal with fm/am connection cable inside and decorate your car, truck, suv, etc.
- Come with the needed screw to connect the wire to your antenna base and adhesive tape to ensure a good seal when mounting it over your existing antenna base.
SHOWview product -
Product Highlights
- 🚗 【unique design】1. baking paint technology. fine workmanship, not easy to deform. 2. streamlined design. reduce resistance, beautiful and generous. 3. strong stickiness. full coverage, not easy to fall off.
- 🚗【easy to install】1. remove the antenna of the original car and wipe clean the side position; 2. take out the antenna and sticker, and stick the tape on the bottom of the antenna; 3. tighten the screw of the antenna with a tool; 4. align the position directly and press firmly. note: 1. before pasting, please keep the installation location clean and dry! 2. after pasting...
- 🚗 【material】made of high-quality abs, durable. the bottom surface is equipped with tape, which can be directly pasted without punching, which is simple and convenient.
- 🚗 【versatility】suitable for most cars with flat roof surfaces. in appearance, it forms a strong color impact, gives people a bright feeling, and immediately improves the car's grade. it is a great decoration. it is more cool and sporty than the original car!
- 🚗【package】car shark fin antenna cover (black)*1, sticker*1. note: please measure the size of the original car antenna before purchasing, otherwise it will not match! the size of the antenna base should be less than 3.19" x2.48" (81mm * 63mm).
SHOWview product -
-
Product Highlights
- Model lwc-4g-pcb-03
- Gain ~ 0/1.5dbi
- This is a pcb antenna having a frequency of 698-960mhz & 1710-2690mhz with 1.5dbi gain. pcb antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. one of the main reasons to use a pcb (printed circuit board) antenna is the reduced overall cost of the radio module.
- Frequency range 698 ~ 960mhz & 1710 ~ 2690mhz
SHOWview product -
-
Product Highlights
- Flexible wi-fi antenna. frequency: 2400-2500mhz. gain: 5dbi. color: black.
- Compatible with: wireless network router, wi-fi ap hotspot modem, wi-fi usb adapter, desktop pc wireless mini pci express pcie network card adapter;compatible with: wireless network router, wi-fi ap hotspot modem, wi-fi usb adapter, desktop pc wireless mini pci express pcie network card adapter;
- Compatible with: 5ghz 5.8ghz fpv camera monitor, fpv drone racing quadcopters controller; 5ghz 5.8ghz wireless av video audio receiver hdmi extender;
- The 5dbi antenna is very easy to use. you just simply replace the current antenna and plug the 5dbi antenna in the device and enjoy the faster signal speed.
- Iso certified product
- 2.4g 5dbi router wireless antenna with sma plug male connector wifi antenna
SHOWview product -
-
Product Highlights
- Interface type: n connector male internal thread inner needle.
- Input impedance: 50ω
- The antenna supports the frequency band: 700m 800m 900m 1.8g 1.9g 2.0g 2.3g 2.4g 2.6g 2.7g (700mhz-2700mhz frequency band).
- Standing wave ratio: ≤2.0. gain: 5 dbi.
- Antenna length: 20 cm / black.
SHOWview product -
Product Highlights
- Lexible wi-fi antenna. frequency: 2400-2500mhz. gain: 6dbi. color: black.
- Compatible with: wireless network router, wi-fi ap hotspot modem, wi-fi usb adapter, desktop pc wireless mini pci express pcie network card adapter;
- Compatible with: 5ghz 5.8ghz fpv camera monitor, fpv drone racing quadcopters controller; 5ghz 5.8ghz wireless av video audio receiver hdmi extender;
- 2.4g 6dbi router wireless antenna with sma plug male connector wifi antenna
- Sma male (internal screw pin); tilt and swivel design.
- Compatible with: wifi ip security camera; wireless video surveillance dvr recorder; truck rv van trail rear view camera, reverse camera, backup camera, industrial router iot gateway modem, m2m terminal, remote monitoring and control, wireless video, wireless hdmi extender;
SHOWview product -
Product Highlights
- Package list: 2 x antenna, 2 x coaxial pigtail cable;(as the picture shown), notice: this ipex ipx u.fl pigtail cable only use for mini pci-e interface network cards, can not fit m.2 ngff interface network cards, please check your network cards before purchasing.
- Compatible with: wireless network router, wifi ap hotspot modem, wifi usb adapter, desktop pc wireless mini pci express pcie network card adapter;
- Dual band wifi: 2.4ghz (2400 - 2485 mhz),5ghz/5.8ghz (5150 - 5850 mhz); gain: 3dbi; direction: omni-directional; antenna connector: rp-sma male connector; accessories cable: 12inch ipx ipex u.fl to rp-sma female bulkhead mount rg178 coaxial pigtail cable;
- The accessoried ipx u.fl coaxial pigtail cables are compatible with most laptop and computer mini pci network card and most computer motherboard that built-in wifi network card with u.fl external antenna connector interface.
- Compatible with: wifi ip security camera; wireless video surveillance dvr recorder; truck rv van trail rear view camera, reverse camera, backup camera, industrial router iot gateway modem, m2m terminal, remote monitoring and control, wireless video, wireless hdmi extender;
SHOWview product
Coupon copied
