10 Best
Rule Livewell Pumps
-
-
Product Highlights
- Topping up the motor unscrew the brass plugs 1 and 2, fitted on top of the motor as shown in fig. 1 below, and fill the motor with pure drinking water till water overflows from the other filling hole. gently rock the motor to release air bubbles and further top up if necessary. then replace the two plugs.
- Use the eye bolts / lifting lugs for lifting / lowering the ows using appropriate equipment. keep the wire ropes remains tied for lifting of the pump set for future. to prevent the motor from getting exposed during pumping, ensure the suction strainer is fitted above the level of the motor. this is done by fitting one end of a bend to the pump suction flange and the str...
- Sd ows motors are provided with two separate 3 core pvc insulated flat cable, each of 3 meters length. repeat the procedure for both 3 core pvc flat cables from the motor to the two cables from the control panel.
- Checking rotation of ows power up the ows and observe the discharge from the pump. next interchange any two phase wires, power up the ows and observe the discharge from the pump. in case the discharge is more after interchanging any two phase wires, then the impeller is rotating in the correct direction within the volute casing. if the discharge after interchanging any ...
- Features designed for under submerged condition water applications all rotating parts are dynamically balanced for longer bearing life and vibration free smooth operation epoxy ceramic coated in the inner parts for rust free operation fitted with quality oil seal easy for installation and no platform required designed to withstand wide voltage fluctuations non overloadi...
- The brass plug 3 mounted on the bottom of the motor, is used for draining the water from within the motor. ensure all three brass plugs are tightened to prevent leakage of water from within the motor. check for leakages before lowering the ows. use prescribed pipe sizes as mentioned on the product name plate. check the level of silt at the bottom of the well. refer fig....
SHOWview product -
-
Product Highlights
- Powerful and long lasting, outstanding performance as well as the versatility of replacing the motor cartridge if the motor expires
- Replacing the motor cartridge only allows the fittings and hose to remain totally intact
- For thru-hull applications, tapered 3/4" npt pickup tube
- Cartridge feature also allows easy access to impeller for cleaning and maintenance
- 3 year warranty
SHOWview product -
-
-
Product Highlights
- Pump turns on when water level rises & shuts off when water is removed
- Snap-off strainer for easy cleaning
- Superior submersible water pump in boating accessories
- All-in-one pump & switch – no float switch required-will turn on automatically when water rises past strainer
- Heavy duty motors with stainless steel shafts and tough thermoplastic bodies
- Easy installation instructions for either 2 or 3 wire setup.( manual to panel switch, automatic, or both)
SHOWview product -
-
-
Product Highlights
- Powerful 1hp/0.75k.w motor. outlet size : 1 inch
- Connects to overhead watertank
- Automatically swiches on & off, when the tap is used.
- Ideal for upto 4 bathroom and kitchen set.
- Robust design automatic pressure booster system for domestic purpose
- Increases & maintains pressure in pipelines of high rise building, regular use prevents blockages in the pipeline.
SHOWview product
Coupon copied
