9 Best
Rockville 10 Inch Subwoofers
-
Product Highlights- Power handling: 200 watts rms / 400 watts program power / 800 watts peak.
- High-power 2-way pro sound reinforcement speaker system for live sound and play back applications.
- State-of-the-art 1.35" japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction.
- Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into the cabinet.
- High-quality components and exceptionally rugged high impact abs construction. impedance: 8 ohms. frequency response: 45hz-20khz. maximum spl @1w/1m: 122db peak / 119db continuous.
- Rockville spgn108 10" passive 800 watt 8 ohm lightweight dj pa abs cabinet speaker.
SHOWview product -
Product Highlights
- Enclosure is very shallow at only 3.15” tall so it can fit anywhere. you can fit it under seat but it also sounds great and takes up little space in your trunk.
- Low level rca input. high level inputs with auto turn-on technology. adjustable input sensitivity. soft delayed remote turn-on. thermal protection circuit, short protection circuit
- Rockville wheel of bass 8" 500w slim under-seat or trunk mounted powered car subwoofer.
- Enclosure is made out of solid cast aluminum. peak power handling: 500 watts. rms power handling: 125 watts. heavy duty mounting feet. pwm mosfet power supply.
- Overload protection circuit. green power/red protect led. phase switch: 0° or 180°. low pass filter: 50hz - 180hz. bass boost: 0 - 12db @ 45hz. built in subsonic filter @ 20hz
SHOWview product -
Product Highlights
- Bluetooth v5.0 | aux 3.5mm | usb pendrive | micro sd card input | fm radio function.;karaoke | 2x wireless mic inside package | recording for mic input | support for connecting 2x 6.3mm wired mic.
- Led display | illuminated control panel on side | fully functional remote control.; glossy finish | elegant design | simple controls.
- Powerful audio with deep bass & crisp clarity | 160w rms output power | room filling audio best for music and movies.;10" subwoofers | 4" mid-range drivers | 1" tweeters | 3-way audio for a noise free replication of natural and theatrical audio output.
- Bass, treble controls | mic echo, volume control | media controls | master volume controls.
- Model: zeb-bt702rucf (hammer); warranty type: 1 year carry into service centre; is waterproof: false
SHOWview product -
-
Product Highlights
- Metal bass remote included, gain, bass boost, and crossover controls, peak power handling: 800 watts, rms power handling: 200 watts, heavy duty mounting feet, pwm mosfet power supply, low level rca input,
- Phase switch: 0° or 180°, low pass filter: 50hz - 180hz, bass boost: 0 - 12db @ 45hz, built in subsonic filter @ 20hz, thd: < 0.4%, fuse rating: single 20a, peak power: 800 watts, rms power: 200 watts, impedance: 4 ohm,
- Rockville ss10p 10" 800w slim under-seat active powered car/truck subwoofer sub, amplifier built in, enclosure is made out of cast aluminum which stays cool even under the seat of your car or truck,
- High level inputs with auto turn-on technology, adjustable input sensitivity, soft delayed remote turn-on, thermal protection circuit, short protection circuit, overload protection circuit, green power/red protect led,
- Frequency response: 20hz - 180hz, signal to noise ratio: >90db, sensitivity: 90db @ 1w / 1m, input sensitivity, low level: 300mv, input sensitivity, high level: 1.0v, dimensions (inches): 13.6" l x 9.65" w x 3" h
SHOWview product -
Product Highlights
- Soft delayed remote turn-on. thermal protection circuit, short protection circuit. green power/red protect led. phase switch : 0° or 180°. low pass filter : 50hz - 150hz. bass boost : 0 - 12db @ 45hz. subsonic filter : 20hz - 50hz. thd < 0.15%. subwoofer level remote control. fuse rating : single 25a.
- Rockville rwk10 10 gauge 2 channel car amplifier wiring installation kit. (1) 17 high grade twisted pair of 100% copper rca cable. 17' 10 gauge translucent blue superflex power cables. 17 18 gauge blue remote cable.
- Rockville uss10 800 watt 10" slim car subwoofer. 800 watts peak / 200 watts rms. pwm mosfet power supply. low level rca input. high level inputs with auto turn-on technology. adjustable input sensitivity.
- We wanted to truly make installation a breeze so we designed this unit with the user in mind from start to finish. we added high level inputs so you can install this to an aftermarket or factory system. the high level input allows you to install this even if you have no preamp outputs available.
- 17 16 gauge clear speaker wire. 3' 10 gauge clear superflex ground wire. gold plated agu heat resistant fuse holder. 40 amp atu inline fuse. 7 split tube loom. accessories included: wire ties, ring terminals, butt connectors, spades, and grommets . soft abrasion proof insulating jacket allows for 100% improved flexibility . pvc outer jacket can with-stand an extreme tem...
SHOWview product -
Product Highlights
- Variable low-pass filter - a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. you will use the low-pass filter to primarily keep high notes out of your subwoofer. adjust it from 50-150 hz to best fit your system.
- Automatic turn-on - this circuit automatically turns the qbus10p on whenever it senses an audio signal. this eliminates the need to run a remote turn on wire making installation a breeze.
- Space saver - the combination of a built-in 500w amplifier that powers the 10” subwoofer makes this ideal for spatially challenged vehicles.
- Ease of installation - takes either speaker wire (high-level) or rca cable (low-level) inputs. this makes connecting the qbus10p to your radio easier since it's compatible with both factory and aftermarket units!
- Variable bass boost - variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
SHOWview product
Coupon copied
