10 Best
Remote Control Repeaters
-
-
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
SHOWview product -
Product Highlights
- It can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control.
- The receiving end has a length of 1.4 meters and the transmitting end has a length of 2 meters. the user can cut it off and lengthen to the required length.
- This usb ir receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes. install the ir transmitter end in a concealed equipment closet to hide a catv box and control it remotely.
- Great compatibility with a wide range of equipment, devices, stb set top boxes. 180 degree ir receiver angle provides plenty of leeway to get the right angle with your remote. remote control signal receiving real-time response to fast forward without delay.
- We've been working in electronics for years and accumulated rich experience, and now we want to share our products'preferences and ingenuity for you to bring you a more fashionable and artisticlife experience.
SHOWview product -
Product Highlights
- ✅ allows ir signals to pass through solid doors or walls, line-of-sight to the components is not required confirmation led built-in to the ir receiver acknowledges receipt of ir commands
- ✅ 5v usb power supply(adapter not included)
- ✅ high sensitivity: remote control signal receiving real-time response to fast forward without delay
- ✅ easy setup: this ir repeater system is easy to use and sets up in minutes
- ✅ control audio video components in entertainment cabinets or equipment closets using existing ir remote controls
SHOWview product -
-
Product Highlights
- ✅ allows ir signals to pass through solid doors or walls, line-of-sight to the components is not required confirmation led built-in to the ir receiver acknowledges receipt of ir commands
- ✅ 5v usb power supply(adapter not included)
- ✅ high sensitivity: remote control signal receiving real-time response to fast forward without delay
- ✅ easy setup: this ir repeater system is easy to use and sets up in minutes
- ✅ control audio video components in entertainment cabinets or equipment closets using existing ir remote controls
SHOWview product -
-
Product Highlights
- -with 1 receiver picks up the signal from the remote controller, the receiver is with a convenient ir confirmation led
- -34-60khz operating range(please aim at ir receiver when using remote control)
- -this ir repeater kit allows you to control a/v component by the existing ir controller, control the ir devices between two rooms such as adjusting the volume or changing tv channel.
- -with 4 emitters send the signal to the a/v components
- -5v usb ac power supply
SHOWview product -
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
- Use an existing infrared (ir) remote control up to numerous individual audio/video components located behind in closed cabinets or closet ,even without line-of-sight access
SHOWview product
Coupon copied
