6 Best
Quality 3d Printers
-
Product Highlights- Improves extrusion and retraction of filament.
- Transparent to see the movement of filament.
- High quality teflon tube improves the flow of 3d printer filament due to non stick characteristics.
- Withstand high temperature nearly up to 280 degree centigrade.
- Ptfe tube of od 4mm id 2mm and for 1.75mm filament.
SHOWview product -
Product Highlights
- Size: 1.75mm,tolerance level : 0.03mm - spool diameter: 7.87 - spool width: 2.83" - spool hub hole diameter: 2.20"
- Performance advantages: the strength and toughness of our pla filament is higher than the general pla filament on the market. the air is filled with slightly sweet smell likes candy when printing
- Material: pla(polylactic acid) - color: red - weight: 1.00 kg (approximately 1.76 lbs) spool
- Recommended printing temp/nozzle temperature: 195-220°c(383-428°f) - base plate temperature: 20-50°c(68-122°f), pla filament can be processed at 185 degrees
- Non toxic: all of products have passed the rohs directive, made by 100% polylactic acid.
SHOWview product -
Product Highlights
- Accurate 5 meter length for each colour.
- 3d printing filament - 1.75mm filament diameter can be compatible with most of 3d pen or 3d painting.
- Quality assurance: 100% bubble free and environmental friendly non toxic material.
- High purity materials : made of high quality material, high purity and mixed waste, recycling materials, ensure the quality of materials, stable and high output.
SHOWview product -
Product Highlights
- 1.75mm pla filament: the pla filaments are useful in a broad range of printing applications which have the advantage of low-odor and low-warp. compared with traditional brittle pla , our 3d printer filaments have adjusted the degradability of the material for optimal performance, so our pla filaments are not brittle during 3d printing jobs.
- 100% environmental friendly: our 3d printer filaments comply with the restriction of hazardous substance (rohs) directive and are free from potentially hazardous substances. the 1.75 mm pla filament gives off a sweet smell, and it is considered by many as an improvement over hot pla plastic.
- +/- 0.03mm tolerance: our pla 3d printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03 mm. no matter which 3d printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. almost all 1.75 mm-specification 3d printers in the market are configured to run with the pla 3d printing fil...
- Vacuumed sealed packaging: some 3d printing materials can be negatively affected by moisture, so this is why our 3d printer filaments are all vacuumed sealed along with a desiccant pack. this will enable you to easily keep your 3d printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Print parameters: recommended nozzle temperature is between 200 - 210 and bed temperature is 50.
SHOWview product -
Product Highlights
- [high precision]--the inner wall of the 3d printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle diameter error is less than 0.02 mm, providing you an accurate and smooth extrusion.
- [extensive compatibility]--outer thread m6,input diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with mk8 hotend for creality 3d printers, compatible with ender-2/ ender-3/v2 ender-3 pro/ ender-5, also compatible with creality cr-10 all-metal hotend, prusai 3, anet a8, reprap and so on.
- [value for money]--including 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 nozzle spanner,possesses 0.2 mm,0.4 mm,0.5mm,0.6 mm,0.8mm size, sufficient quantity to facilitate your timely replacement, achieving quality printing
- [durable material]--mk8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles, hardened stainless steel material is durable to use for a long time with good heat resistance and corrosion resistance, abrasion resistance.
- [good performance]--this mk8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3d printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc
SHOWview product -
Product Highlights
- 1.75mm diameter: perfectly sized for compatibility with most 3d printers on the market.
- Vibrant colors: achieve eye-catching prints with a wide range of vibrant filament colors.
- Versatile 3d printing: create stunning, precise models with our pla 3d printing filament.
- Eco-friendly : crafted from biodegradable pla material, safe for all ages.
- Enjoy a hassle-free 3d printing experience with minimal odors and tangles.
SHOWview product
Coupon copied
