10 Best
Mpow Motion Sensors
-
Product Highlights- Transform existing product to smart product - automatic on & off lights - good solution for energy saving & easy in installation.
- There are 4 wires ,red line is live wire (l); the outermost blue line is neutral wire (n);yellow line and inside blue line connect to light bulb or energy-saving lamp
- Function :auto switch on/off in the dark when you enter into the induction range, and the time delay has 3 way of 15 seconds, 45 seconds, 5 minutes adjustable .in addition to the automatic control of led lights, it can also be used to control exhaust fans, doorbells or other devices
- Reduce power bills - by using equipement/lights when only needed reduces the power consumption and saves enviorment and power bills
- Uses pir technology - sensor can detect the spectral change of the human body,then switch will connect the load to light or device to power on untill the person leaves the sensor range
- Infrared sensor switch working voltage :100-240v ; load power :≤40w ；best sensing distance:3-5m ; mounting hole diameter:25mm/0.98inch
SHOWview product -
Product Highlights
- Compact size, easy for installation and use
- Auto off after off 45sec if no sensor detected by the sensor.
- Sensing range: about 2-3m.
- Day/night sensor( work only in dark) , smartly working with motion sensor (work only when motion active).
- 100% brand new and of high quality.
- The light will auto on when people comes and off when people leave, energy saving
SHOWview product -
Product Highlights
- Modular plates supported:- dewire switch can be fit in your existing switch plates it can be fitted on anchor roma classic,anchor rider, crabtree thames, vanart, ,hifi ,greatwhite, fiana, erik, pritam, western vega, vehan ,airson or similar modular plates.
- Technology: pir(passive infrared based) ; voltage : 220v ac ; load handling capacity : 200 watts ; sensing distance : 12-15 feet ; delay time : 90 seconds (approx) can be adjusted from 1sec – 5 minutes
- Guarantee :- we provide 1 year full replacement
- What does it do:- dewire motion sensor replaces your regular switches and makes it automatic & smart. when a person is detected in its range it turns on the load(for example it can be light/exhaust ) and when the person leaves its range it switches off the device after a desired delay (by default delay is 90 seconds).
- Modular plates not supported:- this switch will not fit in legrand, schneider, norosis, goldmedal, gm, crabtree ethina or philips modular plates.
- Where it can be used :- washroom,toilets,entraces,kitchen,corridors,stairs,store-rooms,warehouses,changing room,powder room,wardrobe & many more similar places
SHOWview product -
Product Highlights
- There are 4 wires, red line is live wire (l); the outermost blue line is neutral wire (n); yellow line and inside blue line connect to light bulb or energy-saving lamp.
- Function :auto switch on/off in the dark when you enter into the induction range, and the time delay has 3 way of 15 seconds, 45 seconds, 5 minutes adjustable .in addition to the automatic control of led lights, it can also be used to control exhaust fans, doorbells or other devices.
- Infrared sensor switch working voltage :100-240v ; load power :?40w; best sensing distance: 3-5m; mounting hole diameter:25mm/0.98 inch
- Pir motion sensor switch has feature of small size and lightweight, easy to install and operate in room or cabinet, plug and play.
- Widely suitable for auto lighting corridors, stairs , bathrooms, basements, warehouses, garages,closet, advertisement light and other places.
SHOWview product -
Product Highlights
- Any load can be used, including monitoring devices, alarm systems, led, fluorescent, and incandescent lights as well as exhaust fans and solenoids. installation scenarios include embedded ceiling installations as well as panel switch positions and covert installations in any location.
- Rate load: 1200w (incandescent), 300w (led load)
- Perfect for any location where you need to switch on a light automatically when someone enters the room or area, such as the hallway, corridor, bathroom, closet, etc., with a 360 degree ceiling and 180 degree wall detection angle. these energy-efficient lights reduce electricity bills by 85%.
- This microwave motion sensor reflects developments in interior lighting technology and almost eliminates energy waste from unnecessary lighting.
- Detection distance: ceiling 1-8m (radius), wall: 5-15m (radius), adjustable
SHOWview product -
Product Highlights
- ✅【𝐖𝐀𝐓𝐄𝐑𝐏𝐑𝐎𝐎𝐅 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋】: ip55 rain cover (fog), dust (worm) and other comprehensive weather-related sealed structures, infrared detector can maintain normal operation in harsh environments. in severe weather (fog, rain, dust, etc.) the range of infrared detector can be reduced to 30%.
- ✅【𝐔𝐍𝐈𝐐𝐔𝐄 𝐃𝐄𝐒𝐈𝐆𝐍】: high-power transmitter, 90% sensitivity margin, high-power infrared transmitter-receiver pair tube, low-power processing technology lightning protection circuit design.high level of anti rfi/emi capability and unique digital filter circuit design.
- ✅【𝐈𝐍𝐒𝐓𝐀𝐋𝐋𝐀𝐓𝐈𝐎𝐍】: the best installation height should be more than 20 cm, installation distance should be not less than 1 m; infrared protection device should be vertically placed, and in the same horizontal line.first, please install the receiver, then the transmitter(when in a straight line, off light of receiver goes out), then fix,connect line and complete installation.
- ✅【𝐒𝐀𝐅𝐄 𝐀𝐍𝐃 𝐑𝐄𝐋𝐈𝐀𝐁𝐋𝐄】: the pair of infrared detectors can reliably generate visible infrared rays up to 20 meters long. the barrier detector frequency of the single beam alarm is 1.92 khz, the power supply is 12 v dc and the wavelength is 940 nm.
- ✅【𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍】: the infrared detector is suitable for security systems in schools, office buildings, hospitals, parking lots, apartments and other places. the barrier detector widely used in alarm systems, access control systems, etc.
- ✅【𝐀𝐂𝐓𝐈𝐕𝐄 𝐑𝐄𝐆𝐔𝐋𝐀𝐓𝐈𝐎𝐍】: resistant to strong light up to 50,000 lux, built-in automatic adjustment of strong light filter system, to avoid the impact of strong light or car lights.moreover, the detector will automatically enhance sensitivity when encountering heavy fog or bad weather.(agc circuit)
SHOWview product -
Product Highlights
- Modular plates supported:- aura switch can be fit in your existing switch plates it can be fitted on anchor roma classic,anchor rider, crabtree thames, vanart, ,hifi ,greatwhite, fiana, erik, pritam, western vega, vehan ,airson or similar modular plates.
- Technology: pir(passive infrared based) ; voltage : 220v ac ; load handling capacity : 200 watts ; sensing distance : 12-15 feet ; delay time : 90 seconds (approx) can be adjusted from 1sec – 5 minutes
- Guarantee :- we provide 1 year full replacement
- What does it do:- aura motion sensor replaces your regular switches and makes it automatic & smart. when a person is detected in its range it turns on the load(for example it can be light/exhaust ) and when the person leaves its range it switches off the device after a desired delay (by default delay is 90 seconds).
- Modular plates not supported:- this switch will not fit in legrand, schneider, norosis, goldmedal, gm, crabtree ethina or philips modular plates.
- Where it can be used :- washroom,toilets,entraces,kitchen,corridors,stairs,store-rooms,warehouses,changing room,powder room,wardrobe & many more similar places
SHOWview product -
Product Highlights
- Small in size 60lx35wx40h mm
- 1 year replacement warranty
- Detection range ~ 6 meter
- Surge protection upto 2.7kv (unique feature)
- To cover larger area, buy 2 sensors and connect them into parallel configuration with load
- How it work : when a person is detected in its range it turns on the load ( for example it can be bulb/exhaust ) and when the person leaves its range it switches off the device after a desired delay (default delay is 120 seconds).
SHOWview product -
Product Highlights
- Easy installation: the wall-mounted sensor is easy to install and can be mounted at a height of 2.2-4 meters.
- Suitable for various loads: the sensor can be used with a variety of loads such as incandescent lamps, led lights, clfs, fans, and more.
- Low power consumption: the device has a static power consumption of only 0.1w and a working power consumption of 0.4w.
- Works by receiving human motion infrared rays: the pir sensor detects movement by receiving human motion infrared rays, making it highly accurate and efficient.
- Wide detection range: the sensor has a detection range of 180 degrees and a maximum detection distance of 10-12 meters.
- Adjustable lux settings: the lux settings can be adjusted between 3-2000, making it ideal for use in different lighting conditions.
SHOWview product -
Product Highlights
- There are 4 wires, red line is live wire (l); the outermost blue line is neutral wire (n); yellow line and inside blue line connect to light bulb or energy-saving lamp.
- Function :auto switch on/off in the dark when you enter into the induction range, and the time delay has 3 way of 15 seconds, 45 seconds, 5 minutes adjustable .in addition to the automatic control of led lights, it can also be used to control exhaust fans, doorbells or other devices.
- Infrared sensor switch working voltage :100-240v ; load power :?40w; best sensing distance: 3-5m; mounting hole diameter:25mm/0.98 inch
- Pir motion sensor switch has feature of small size and lightweight, easy to install and operate in room or cabinet, plug and play.
- Widely suitable for auto lighting corridors, stairs , bathrooms, basements, warehouses, garages,closet, advertisement light and other places.
SHOWview product
Coupon copied
