8 Best
Motor Drives
-
Product Highlights- L298n: current sense for each motor | heatsink for better performance | power-on led indicator | directional control | speed control | high power motor || bo motor: low density and inertia | capability to absorb shock and vibration as a result of elastic compliance | ability to operate with minimum or no lubrication | relatively low coefficient of friction || wheel: car...
- The bo motor is ideal for diy enthusiasts. this motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. the 65mm wheel is only compatible with bo motor.
- L298n as main driver chip makes strong driving ability and strong anti-interference
- The l298n motor driver is perfect for robotics and mechatronics projects. it can also be used for controlling motors from microcontrollers, switches, relays, etc. it is capable of driving dc and stepper motors for micro mouse, line following robots, robot arms, etc.
- L298n: input voltage:3.2v-40v dc | l298n dual h-bridge dc motor driver | operating voltage:dc 5v-35v | peak current:2amps | speed control:pwm | control signal input voltage range:0.3v≤vin≤1.5v (low), 2.3≤vin≤vss (high) | max.
SHOWview product -
Product Highlights
- Can drive 4 dc motors or 2 stepper motors or 2 servo
- 2 external terminal power interface, for seperate logic/motor supplies* compatible with mega, diecimila & duemilanove
- 2 interface for 5v servo connected to the high-resolution dedicated timer - no jitter!
- 4 h-bridges: per bridge provides 0.6a (1.2a peak current) with thermal protection, can run motors on 4.5v to 36v dc
- Up to 4 bi-directional dc motors with individual 8-bit speed selection
SHOWview product -
Product Highlights
- L298n: current sense for each motor | heatsink for better performance | power-on led indicator | directional control | speed control | high power motor || bo motor: low density and inertia | capability to absorb shock and vibration as a result of elastic compliance | ability to operate with minimum or no lubrication | relatively low coefficient of friction || wheel: car...
- The l298n motor driver is perfect for robotics and mechatronics projects. it can also be used for controlling motors from microcontrollers, switches, relays, etc. it is capable of driving dc and stepper motors for micro mouse, line following robots, robot arms, etc. the bo motor is ideal for diy enthusiasts. this motor set is inexpensive, small, easy to install and idea...
- Robotbanao l298n motor driver controller module is a high power motor driver for driving dc and stepper motors. it can control upto 4 dc motors, or 2 dc motors with directional and speed control. this motor driver is for robotics and mechatronics projects. the 150 rpm dual shaft bo motor is a straight motor which gives good torque and rpm at lower operating voltages. it...
- Dimensions: l298n(lxwxh):44x44x28mm | shaft length:7mm | shaft diameter:5.5mm | motor(lxwxh):55x48x23mm | diameter of wheel:65mm | center shaft hole diameter (mm):5.4 (round edge) and 3.5 (flat edge)
- L298n: input voltage:3.2v-40v dc | l298n dual h-bridge dc motor driver | operating voltage:dc 5v-35v | peak current:2amps | speed control:pwm | control signal input voltage range:0.3v≤vin≤1.5v (low), 2.3≤vin≤vss (high) | max. power consumption:20w (when the temperature t=75℃) || bo motor: operating voltage:3 to 12v | current (without loading):40-180ma | rpm:100 | output...
SHOWview product -
Product Highlights
- L298n: current sense for each motor | heatsink for better performance | power-on led indicator | directional control | speed control | high power motor || bo motor: low density and inertia | capability to absorb shock and vibration as a result of elastic compliance | ability to operate with minimum or no lubrication | relatively low coefficient of friction || wheel: car...
- L298n motor driver controller module is a high power motor driver for driving dc and stepper motors. it can control upto 4 dc motors, or 2 dc motors with directional and speed control. this motor driver is for robotics and mechatronics projects. the 300 rpm single shaft bo motor is a straight motor which gives good torque and rpm at lower operating voltages. it is a gea...
- The l298n motor driver is perfect for robotics and mechatronics projects. it can also be used for controlling motors from microcontrollers, switches, relays, etc. it is capable of driving dc and stepper motors for micro mouse, line following robots, robot arms, etc. the bo motor is ideal for diy enthusiasts. this motor set is inexpensive, small, easy to install and idea...
SHOWview product -
Product Highlights
- Use of original chip, built-in low on-resistance mos switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
- Small size, light weight, 0 standby current, is the ideal choice for your car model.
- (l298n internal transistor switch, low efficiency, high fever, without heat, heavy volume, the market of l298n is easy to burn out, do not use the original chips, this product can be the perfect replacement.)
- Dual 1.5a * 2, the peak current to be 2.5a, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
- Dual h-bridge motor driver, can drive two dc motors or a 4-wire two-phase stepper motor.
SHOWview product -
More Deals
Coupon copied
