10 Best
Klipsch Amplifier For Subwoofers
-
Product Highlights- Mosfet based with pure copper transformer for improved sound quality and power handling. please keep the amplifier switched off while connecting speaker wires to prevent damage.
- Inputs: 1xrca. line out through rca to connect with other audio devices like any other amplifiers.
- Double channel amplifier with 150 watts rms per channel nominal output and 300 watts rms per channel peak output. active low pass filter with soft start and speaker protection relay circuit. heavy heat sink
- Direct mode deactivates low pass filter and amplifier can be used as power amplifier. use direct mode when using with avrs or sound processors
- Support for 2 subwoofers rated upto 150-200 watts rms, single coil subwoofers, woofer size: 6-12 inches, frequency response: 10hz to 150hz, impedance: 4-8 ohms, dimensions - wxdxh = 12.5x10.5x4 inches
SHOWview product -
Product Highlights
- Frequency range- 35hz-200hz, power handling- 300w, peak power handling- 3200w, sensitivity (2.83v/m)- 90db
- Mounting strap to secure the subwoofer with robust grill for cone protection
- 8inch (200mm) sub-woofer with full depth d-shape design. mega bass with mono amplifier suited specially for low frequencies with low distortion
- High energy strontium magnet | nominal impedance 4 ohms
- 1 year warranty. bass-reflex subwoofer supported by tubeen enclosure with vented port. for warranty related queries. call customer care no- 8800852623
SHOWview product -
Product Highlights
- Mosfet based with pure copper transformer for improved sound quality and power handling. please keep the amplifier switched off while connecting speaker wires to prevent damage.
- Inputs: 1xrca. line out through rca to connect with other audio devices like any other amplifiers.
- Double channel amplifier with 200 watts rms per channel nominal output and 300 watts rms per channel peak output . separate active low pass filter for left and right channels with soft start and speaker protection relay circuit. heavier heat sink
- Direct mode deactivates low pass filter and amplifier can be used as power amplifier. use direct mode when using with avrs or sound processors
- Support for 2 subwoofers rated upto 300-400 watts rms, single coil subwoofers, woofer size: 12-15 inches, frequency response: 10hz to 150hz, impedance: 4-8 ohms, dimensions - wxdxh = 12.5x10.5x4 inches
SHOWview product -
Product Highlights
- Voltage: 12 volt dc
- Warranty: 12 months manufacturer warranty and no warranty on burnt and physical damage
- Material: mdf; color: black; compatible vehicles: compatible with all cars
- Safety & care instructions: avoid water splash
- List of included items: 1 bass tube
SHOWview product -
Product Highlights
- Powerful sound field experience: integrated tda7498e power amplifier chip, supports 2.1 channel configuration, including left channel, right channel and subwoofer output. the left and right channels provide an output power of 160w each, and the subwoofer reaches a maximum output of 220w, creating an immersive audio experience for you.
- Compatible with a variety of speakers: the board is suitable for 30-200w, 4-8ω speakers, so it can perfectly match with speakers of various specifications. whether it is a small speaker or a large audio equipment, it can be coordinated with the power amplifier board.
- 3-in-1 multi-function input: this power amplifier board integrates aux, bluetooth and usb input methods, allowing you to connect a variety of audio sources as you like. what's more convenient is that you can easily switch between input modes and songs through the dial button, and enjoy the fun of music to the fullest.
- Wide power supply adaptation range: the power amplifier board is suitable for dc15~36v power supply, and also has undervoltage protection function when it is lower than 9v, and supports 12v power supply option. this means that you can choose a suitable power supply method according to your actual needs without worrying about power supply issues.
- Perfect protection mechanism: our power amplifier board has built-in comprehensive protection mechanism, including anti-reverse polarity, undervoltage, overheating, overcurrent and short circuit protection. these smart protection features keep your audio system and speakers safe, so you can enjoy your music with confidence.
SHOWview product -
Product Highlights
- Rms bridge power at 4 ohms - 220w, total peak power - 880w frequency response - 20 hz -20khz at 1db
- Maximum line input signal level - 5v, line input maximum sensitivity - 0.2 v
- Operating voltage - 9-16 v, rms power at 4 ohms - 90w, rms power at 2 ohms -110w
- Maximum high input signal level - 12 v, high input maximum sensitivity -0.5 v
- Quiescent current draw - <1.5a , fuse size - 2 x 20a
SHOWview product -
-
Product Highlights
- Volume button adjustment & dsp function-volume can be controlled by pressing the increase/decrease volume button, volume will be displayed on volume indicator, convenient for adjustment. this mini audio amplifier dsp function makes the amplifier convenient do active frequency division, delay processing, and eq tuning, so that the complex environment can be improved. 16-...
- Okos 100w+100w mini power amp is a compact and versatile audio amplifier designed for various applications.
- Featuring bluetooth connectivity, it seamlessly integrates into your home, allowing wireless audio streaming.
- 100w+100w output power-100w max power output x 2, providing much better sound quality and shocking auditory effects. comes with 12v 5a power supply, available for 2-10 inches speakers. not equipped with av cable
- Multi-use-suitable for your desktop or a smaller space in your home or office. this mini bluetooth amplifier is easy to connect to your audio system with no software to install or settings to change.
- This stereo audio speaker amplifier is perfect for small desktop setups, providing high-quality sound in a small form factor.
SHOWview product -
Product Highlights
- 10" subwoofer with 992g (35 oz) magnet, voice coil: 1.5" (38 mm) 3.2ω
- Frequancy response: 37~200hz-37~2000hz, sensitivity: 86± 2db/1w at 1m
- Active bass tube with amplifier: compatible with all cars
- Injection paper cone rubber edge, impedance: 4ω, rated power: 500w rms, max. power: 1500w peak
- Dimensions: 553*297*297 (w*d*h)
SHOWview product
Coupon copied
