9 Best
Ir Repeaters
-
Product Highlights- -with 1 receiver picks up the signal from the remote controller, the receiver is with a convenient ir confirmation led
- -34-60khz operating range(please aim at ir receiver when using remote control)
- -this ir repeater kit allows you to control a/v component by the existing ir controller, control the ir devices between two rooms such as adjusting the volume or changing tv channel.
- -with 4 emitters send the signal to the a/v components
- -5v usb ac power supply
SHOWview product -
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
- Use an existing infrared (ir) remote control up to numerous individual audio/video components located behind in closed cabinets or closet ,even without line-of-sight access
SHOWview product -
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
SHOWview product -
Product Highlights
- ✅ allows ir signals to pass through solid doors or walls, line-of-sight to the components is not required confirmation led built-in to the ir receiver acknowledges receipt of ir commands
- ✅ 5v usb power supply(adapter not included)
- ✅ high sensitivity: remote control signal receiving real-time response to fast forward without delay
- ✅ easy setup: this ir repeater system is easy to use and sets up in minutes
- ✅ control audio video components in entertainment cabinets or equipment closets using existing ir remote controls
SHOWview product -
-
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
SHOWview product -
-
Product Highlights
- ✅ allows ir signals to pass through solid doors or walls, line-of-sight to the components is not required confirmation led built-in to the ir receiver acknowledges receipt of ir commands
- ✅ 5v usb power supply(adapter not included)
- ✅ high sensitivity: remote control signal receiving real-time response to fast forward without delay
- ✅ easy setup: this ir repeater system is easy to use and sets up in minutes
- ✅ control audio video components in entertainment cabinets or equipment closets using existing ir remote controls
SHOWview product -
Coupon copied
