10 Best
Ir Extenders
-
-
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
SHOWview product -
Product Highlights
- Plug the ir receiver cable into the receiver.and ir transmitter cable plug into the transmitter if you need the ir receiver cable,aim at the equipment which needs to control.
- Connect one hdmi cable between source device and tx extender, the max cable distance is 10 meters;
- Connect one hdmi cable between display device and rx extender, the max cable distance is 15 meters;
- Connect one hdmi cable between source device and tx extender, the max cable distance is 10 meters;
SHOWview product -
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
- Use an existing infrared (ir) remote control up to numerous individual audio/video components located behind in closed cabinets or closet ,even without line-of-sight access
SHOWview product -
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
SHOWview product -
-
-
Product Highlights
- -with 1 receiver picks up the signal from the remote controller, the receiver is with a convenient ir confirmation led
- -34-60khz operating range(please aim at ir receiver when using remote control)
- -this ir repeater kit allows you to control a/v component by the existing ir controller, control the ir devices between two rooms such as adjusting the volume or changing tv channel.
- -with 4 emitters send the signal to the a/v components
- -5v usb ac power supply
SHOWview product -
Product Highlights
- Compact size design: it is light-weight, small-size and solid, and the line length of the ir emitter is up to 3.0m, long enough to put in anywhere in your house
- Strong compatibility: with wide frequency range, it is compatible with almost all the electronic products and appliances in the market
- High sensitivity: real-time transmission without any delay with its high-sensitivity sensors
- Energy-saving and environment-friendly: this emitter can work in most lighting environment
- Good-quality cord: made of good-quality plastic material, the cord is durable and not easy to wind
SHOWview product
Coupon copied
