7 Best
Ir Extender For Cable Box Comcasts
-
Product Highlights- Cost-effective the purpose of the extender is to achieve long-distance signal transmission with low-cost wires
- Audio format supports dolby dts;lcpm audio pass through.
- The 4k 120m hdmi extender uses one single cat-5e or cat-6(recommended) cable instead of hdmi cable; you can extend the hdmi1.3 1080p signal to 120 meters or hdmi 1.4 4kx2k 30hz up to 60 m.
- Without signal loss uncompressed hdmi audio and video transmission; no delay no signal loss.
- Ir & cascade supports ir pass back (remote control the source at the receivers side) and cascading connection (max. 8 receivers can be linked).
SHOWview product -
Product Highlights
- 5ft long shielded cable with 3.5mm end plug, simple plug and play, quick and easy.
- Made of high-quality plastic material, the cord is durable.
- Warranty not applicable for this product
- If you have used these kind of cables earlier then only buy. before buying the product, also cross check whether the host has an infrared interface or not and then only buy this product. compatible with avr, av receiver, cable box, set top box, av equipment, etc. with 3.5mm ir input port
- Real time transmission without any delay with its high sensitivity sensor.
- An adhesive backing is included for easy installation.
SHOWview product -
Product Highlights
- Ir emitter output: 4×3.5mm jack connector, for ir-em-3 emitter; 1×3.5mm jack connector, for ir blaster.
- Ir signal indication: blue indication led power indication: red indication led
- Ir input: 1×3.5mm jack connector, for ir-cv-3 receiver(3 conductor plug); 1×3.5mm jack connector, for ir-cv-4 receiver (4 conductor plug).
- Status indication: green led for system on/off indication
- Use an existing infrared (ir) remote control up to numerous individual audio/video components located behind in closed cabinets or closet ,even without line-of-sight access
SHOWview product -
Product Highlights
- 1.support point-to-point, multi-receiver cascade- connect your hdmi source device (pc, game console, blu-ray player, media player) to the transmitter, utilize existing ethernet structure in your house/office to connect the transmitter to receiver, then connect your hdtv from a remote location to the receiver with an hdmi cable; hdmi cables are required and sold separately
- 4.for better picture quality and longer distance transfer, we recommend to use cat 6 or cat 7 cable.
- 2.vibrant video & authentic audio -supports 4k/1080p/720p/576p/576i/480p/480i, support dts/dolby/lpcm
- 3.special design: the transmitter can act as the receiver. receiver can act as transmitter (note: except ir control)
- 5.supports ir pass back(remote control the source at the receiver’s side)and cascading connection (max. 8 receivers can be linked).
SHOWview product -
Product Highlights
- Smallest size – at 21mm x 12mm this is by far the smallest less obtrusive ir receiver.
- Replaces cisco/scientific atlanta ir extender 1004648,4029013,4022323 works with verizon fios cable boxes model qip, chs, ipc, vms series except qip6xxx and qip2500, also works with dta271, dta50 etc
- Hdtv hookup new 9.8ft add on ir receiver is a perfect addition, so you can hide your cable box and other products, so they are out of mind.
- Full ir frequency range for todays technology at 38khz and 56khz. with a supporting distance of 40ft @38khz and 25ft @56 khz.
- Easy to install and use - allows you to hide your equipment and operate the equipment remotely. simple plug and play. unplug the power from the cable box then plug the ir receiver into the ir in port. plug in the power for the box.
SHOWview product -
-
Product Highlights
- ➤𝗦𝘂𝗽𝗽𝗼𝗿𝘁𝗲𝗱 𝗩𝗶𝗱𝗲𝗼 𝗥𝗲𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 : 4k@30hz, 1080p, 1080i, 720p, 576p, 576, 480p, 480i; supported audio formats - dolby digital, dolby truehd, dts, dts-hd, dolby-ac3, dsd, lpcm7.1,extends 4k@30hz/ 1080p up to 400ft via cat5e / cat6 / cat7 ethernet cable | max. 50ft on each hdmi cable | hdmi 1.4, hdcp 1.4
- ➤𝗖𝗼𝗻𝗻𝗲𝗰𝘁 𝗜𝗥 𝗰𝗼𝗻𝘁𝗿𝗼𝗹: connect the “ir receiver “into “ir-tx” port on transmitter, and “ir transmitter ” into the “ir-rx” on receiver, and make sure the ir transmitter aim at ir receiver of the controlled device if you need the ir control function.
- ➤𝗟𝗼𝗰𝗮𝗹 𝗟𝗼𝗼𝗽 𝗢𝘂𝘁: allows one additional display on the signal sending side provides convenience for monitoring; remote ir control - control the input hdmi video source (e.g. dvd player) from the display (e.g. tv, monitor) location with the included ir sensor cables; cascading - allows 1-to-1 or 1-to-multiple extension with additional receiver unit.
- ➤𝗣𝗿𝗲𝗺𝗶𝘂𝗺 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗤𝘂𝗮𝗹𝗶𝘁𝘆 : provides 8000v industry-level surge protection against static electricity and lightning strikes; latest innovation – newly-designed isolation transformer enhances your signal for stable transmission over longer distances and also isolates the core for added protection from power surges and lightning strikes.
- ➤𝗖𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻: connect two pieces of 5v power supply to the transmitter and receiver, power supply for the equipment and the led indicator light on. when status lamp on and flicker, equipment starts normal.
SHOWview product
Coupon copied
