10 Best
Hole Saw For Ceramic Tiles
-
Product Highlights- Wide applications: suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. not suitable for drilling tempered glass, plastic and wood.
- Features: diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Uptodatetools diamond drill bits: electroplated diamond is uniform and more wear-resistant. the hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Large clearance hole: the diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. makes the drilling process easier. the cutting is flat and smooth without scratches.
- Tips: use at low drilling speeds and drilling pressure. always work with coolant (water) when drilling. not suited for concrete or depth beyond about 1/2 inch. the hole should be entered smoothly, and no side pressure is applied.
SHOWview product -
Product Highlights
- Please start your hole diagonally, make a round trace and then hold drill straight.
- Suitable for use in boreholes on glass, marble, tiles or granite.
- N order to prolong the life of this glass hole saw, please work with coolant when processing.
- * wide used for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass.
- Cut holes smoothly, tidily, without broken edges and vibration phenomenon.
SHOWview product -
Product Highlights
- *quality preferred: the diamond hole cutter is made of industrial-grade carbon steel and plated with a nickel coating to enhance the corrosion resistance. the high quality diamond coating improves the hardness, sharpness and cutting speed of the drill bit and realizes a smooth, high precision cutting edge without damage
- *widely used: the glass hole saw suitable for glass, tile, fiberglass, porcelain tile, ceramic, slate mable, granite light stone. not for use on concrete.
- Uptodatetools *package included: 10 x diamond hole saw set with hole diameter: 3/8” / 10mm, total length: 2” / 50mm.
- *how to use: during operation, please keep adding water to keep the hole saw cool and increase lubricity. keep the drilling speed at 800-1000 per minute to reduce the drilling pressure, which can greatly extend the service life of the hole saw. (please note that: dry drilling is strictly prohibited for this product.)
SHOWview product -
Product Highlights
- Diamond coated - diamond coating enhances the drilling speed, which makes the bit more sharp.electroplated diamond is uniform and more wear-resistant.
- Special design - the diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. makes the drilling process easier. not suitable for drilling tempered glass, plastic and wood.
- Size - 65mm(3.56-inch) drilling diameter, 10mm(0.4-inch) shank diameter. the hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength
- Nickel plated surface - nickel plating surface can extend the service life and enhance the surface corrosion resistance. diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- Applications - perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (need to be used at a low speed; always use lubrication (water) when processing, otherwise the hole saw will burn.)
SHOWview product -
Product Highlights
- Diamond tipped drill bits: electroplated diamond is uniform and more wear-resistant. the hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Sharp & smooth cut: diamond hole saw creates high precision, smooth cuts with no broken edges. white zinc plating on the bits maximizes tool’s life with great resistance to corrosion
- Specification: size: 80mm / 3.15". suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. the spotting drill bit in the center helps for cutting accurate holes
- Large clearance hole: the diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. makes the drilling process easier. the cutting is flat and smooth without scratches.
- Tips: please use at low drill speeds and drill pressure. always work with coolant (water) when drilling. not suitable for drilling tempered glass, plastic and wood. not suited for use on concrete or for depths beyond about 1/2".
SHOWview product -
Product Highlights
- * widely used for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. not suitable for drilling tempered glass, plastic and wood.
- * please start your hole diagonally, make a round trace and then hold drill straight.
- * in order to prolong the life of this glass hole saw, please work with coolant when processing.
- * this glass hole saw needs to be used at a low speed, about 800-1000rpm.
SHOWview product -
-
Product Highlights
- Premium quality materials - these diamond hole saws are made of high speed steel for durability, longevity, superior quality and performance for clean, precise holes.
- Package contents 10-piece professional grade integrated steel diamond hole saw - 1/4 in. (6 mm), 5/16 in. (8 mm), 3/8 in. (10 mm), 1/2 in. (12 mm), 9/16 in. (14 mm), 5/8 in. (16 mm), 11/16 in. (18 mm), 4/5 in. (30 mm), 1-1/5 in.
- Ideal applications - this set of diamond coated core drills is perfect for drilling full round holes in glass, marble, tile, granite or other materials. they are especially suitable for drilling glass, tile bottles, mason jars, fiberglass tiles, slate mable, granite lamp stones.
- Cuts sharp and smooth - diamond hole saws are coated with high-grade diamond for high-precision, smooth cuts without damaging edges. reduced drilling speed, reduced drilling pressure and water lubrication greatly extends the life of the drill.
- Warning - keep adding water while drilling to prolong service life. in addition, water lubrication will improve the drilling experience.
SHOWview product -
Product Highlights
- Diamond coated - diamond coating enhances the drilling speed, which makes the bit more sharp.electroplated diamond is uniform and more wear-resistant.
- Special design - the diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. makes the drilling process easier. not suitable for drilling tempered glass, plastic and wood.
- Size - 6mm(1/4-inch) drilling diameter, 5.5mm(0.22-inch) shank diameter. the hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Nickel plated surface - nickel plating surface can extend the service life and enhance the surface corrosion resistance. diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- Applications - perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (need to be used at a low speed; always use lubrication (water) when processing, otherwise the hole saw will burn.)
SHOWview product -
Coupon copied
