10 Best
Filament For 3d Printers
-
-
Product Highlights
- Size: 1.75mm,tolerance level : ± 0.03mm - spool diameter: 7.87" - spool width: 2.83" - spool hub hole diameter: 2.20"
- Performance advantages: the strength and toughness of our pla filament is higher than the general pla filament on the market. the air is filled with slightly sweet smell likes candy when printing
- Material: pla(polylactic acid) - color: grey - weight: 1.3 kg (approximately 2.20 lbs) spool
- Recommended printing temp/nozzle temperature: 195-220°c(383-428°f) - base plate temperature: 20-50°c(68-122°f), pla filament can be processed at 185 degrees
- Non toxic: all of products have passed the rohs directive, made by 100% polylactic acid.
SHOWview product -
Product Highlights
- Pla, aka polylactic acid, is a multipurpose material commonly used in 3d printing. pla is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. as a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as abs). we tend to favor pla as our defa...
SHOWview product -
Product Highlights
- 1.75mm abs filament: the abs filaments are useful in a broad range of printing applications and can be used to print engineering components, electronic enclosures, automotive components and many more. compared with traditional brittle pla , abs 3d printer filaments provide a better strength and temperature resistance for optimal performance. our abs filaments are not br...
- Print parameters: recommended nozzle temperature is between 230 - 240 and bed temperature is 80 - 90. make sure to use a good adhesive to print the parts. you can use gluestick or abs paste to print the parts and avoid warpage from the bed.
- +/- 0.03mm tolerance: our abs 3d printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03 mm. no matter which 3d printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. almost all 1.75 mm-specification 3d printers in the market are configured to run with the abs 3d printing fil...
- Vacuumed sealed packaging: some 3d printing materials can be negatively affected by moisture, so this is why our 3d printer filaments are all vacuumed sealed along with a desiccant pack. this will enable you to easily keep your 3d printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Enclosure printing: small prints of a couple of hours can be printed on open machines, however long prints are recommended to be printed in an enclosed machine. else there might be stress cracks in the prints. the abs filament is compatible with all machines that print with a nozzle temperature of up to 240.
SHOWview product -
Product Highlights
- 1.75mm pla filament: the pla filaments are useful in a broad range of printing applications which have the advantage of low-odor and low-warp. compared with traditional brittle pla , our 3d printer filaments have adjusted the degradability of the material for optimal performance, so our pla filaments are not brittle during 3d printing jobs.
- 100% environmental friendly: our 3d printer filaments comply with the restriction of hazardous substance (rohs) directive and are free from potentially hazardous substances. the 1.75 mm pla filament gives off a sweet smell, and it is considered by many as an improvement over hot pla plastic.
- +/- 0.03mm tolerance: our pla 3d printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03 mm. no matter which 3d printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. almost all 1.75 mm-specification 3d printers in the market are configured to run with the pla 3d printing fil...
- Vacuumed sealed packaging: some 3d printing materials can be negatively affected by moisture, so this is why our 3d printer filaments are all vacuumed sealed along with a desiccant pack. this will enable you to easily keep your 3d printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Print parameters: recommended nozzle temperature is between 200 - 210 and bed temperature is 50.
SHOWview product -
Product Highlights
- 📏【dimensional accuracy & consistency】--- iboss 3d printer pla plus filament of 1.75mm diameter, minimum tolerance and low warping to ensure consistent feeding and stable prints.dimensional accuracy + / - 0.02 mm ; 1 kg spool (2.2lbs), which making filament that have an outstanding surface finish and are highly precise.
- 📦【vacuumed sealed packaging】--- net weight: 1kg. iboss pla+ filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3d models.
- ✨【pla+ filament advantages】--- pla+ 3d printer filament is improved and upgraded based on pla filament,good adhesion performance ,high strength and better toughness.clog/bubble/tangle/warping/stringing free, high durability, better layer adhesion.iboss filaments are made with virgin materials, no pollution, non-toxic and no odor during the printing.
- 🧵【tangle free & bubble-free & clog-free】--- our 3d printing filaments are easy-to-use.total length: 340-350m.recommended print temperature:210-230℃.melt well, feed smoothly and constantly without clogging the nozzle or extruder.full mechanical winding and strict manual examination,to make sure the line tidy and no-tangle.
- 🛠️【wide compatibility】--- compatible with most of fdm 3d printers that use 1.75mm filament, such as: prusa, reprap, afinia, makerbot, printrbot, ultimaker, airwolf, aleph objects, makergear, up, lulzbot, simplify3d, flashforge, etc.
SHOWview product -
Product Highlights
- [easy-to-use, clog-free & bubble-free] - special precision oscillating strand guide technology guarantees tidy and tangle-free winding. filaments are dried before packaging to ensure a smooth and stable printing experience.
- [dimension accuracy & consistency] - fully automated closed-loop diameter measuring and self-adaptive control system in the manufacturing process ensures strict diameter tolerance of +/- 0.05 mm.
- [high quality, less odor & less warping] - numakers premium petg filament is produced using high-quality petg resin developed specifically for 3d printing filament. our special formulation leads to minimal odor and low warpage during printing. enclosed chamber is required for better quality and durability when printing big parts with petg filaments.
- [wide compatibility] - 1.75mm petg filament compatible with practically all desktop 3d printers, including monoprice, ender 3, airwolf, ultimaker, makergear, lutzbot, flashforge and many more.
- [wallet friendly] - economies of scale and improved production efficiency allows numakers petg filament to be cost-effective and wallet-friendly without compromising on quality.
SHOWview product -
-
Product Highlights
- [easy-to-use, clog-free, bubble-free] - special precision oscillating strand guide technology guarantees tidy and tangle-free winding. filaments are dried before packaging to ensure a smooth and stable printing experience.
- [dimension accuracy & consistency] - fully automated closed-loop diameter measuring and self-adaptive control system in the manufacturing process ensures strict diameter tolerance of +/- 0.03 mm.
- [high quality & toughness enhanced] - numakers premium pla filament is produced using usa sourced high-quality pla resin developed specifically for 3d printer filament. compared to other pla filaments, numakers pla filament has excellent printability as well as improved impact resistance in printed parts.
- [wide compatibility] - 1.75mm pla filament compatible with practically all desktop 3d printers, including makerbot, monoprice, ender 3, airwolf, ultimaker, makergear, lutzbot, flashforge and many more.
- [wallet friendly] - economies of scale and improved production efficiency allows numakers filament to be cost-effective and wallet-friendly without compromising on quality.
SHOWview product -
Coupon copied
