10 Best
Fan For Wood Stove Circulate Airs
-
Product Highlights- No noise-4 larger blade, larger air volume, lower noise.the working noise is below 25db, very quiet.you can enjoy the warm air in your quiet and comfortable environment.
- Wide application-the stove fan can be used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently
- Eco friendly-heat powered,the stove fan is powered by heat from your fireplace or wood burning stove, no batteries or electricity required. the hotter the stove is, the faster the stove fan spins, efficiently circulate warm air throughout the room
- Great design-height only 20 cm / 7.87'' to fit narrow spaces.the top has a hanging handle, which can be hung above the fireplace to blow the heat to the entire room to make it warmer.
- Operating temperature-the general working temperature of the stove fan is 80°c - 345°c(176℉-653℉). usually the fan gets spinning at about 55°c, and turns most efficiently when the temperature reaches about 250°c-300°c. note: if the max temp on your stove top is even below 100°c / 212°f, don't buy it, the fan will can't works efficiently.
SHOWview product -
-
Product Highlights
- 【eco friendly】heat powered, the stove fan generates its own energy by the heat from the stove surface, and no batteries or electricity required. no assembly needed, just put on the top of stove, the fan will spin with the temperature getting higher.
- 【operating temperature】the general working temperature of the stove fan is 80°c - 350°c(185°f - 660°f). usually the fan gets spinning at about 80°c, and turns most efficiently when the temperature reaches about 250°c-300°c. the hotter the stove is, the faster the stove fan spins.it is recommended that the maximum temperature not exceed 350 °c, otherwise the stove fan ma...
- 【necessary fireplace accessories】the stove fan uses the heat of your stove and distributes it horizontally from the chimney into the room - instead of the heat unused under the ceiling! the stove fan is widely used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently
- 【whisper-quiet】the only moving part of the stove fan is the blades assembly, so the normal operating noise of less than 25 db, very quiet. you even do not know the stove fan is there, but you will feel the warmth well.
- 【overheating protection】if the surface temperature rises above approx 300 ℃, a bi-metal safety device at the foot of the fan becomes active. the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached.
SHOWview product -
-
-
Product Highlights
- 🏘️ feature: silent operate, less consumption, more efficiency.
- 🏘️ size chart:19cmx14cmx21.5cm/7.48inchx5.51inchx8.46inch
- 🏘️ fireplace fan: 4 vanes stoves fan use heat from the stoves surface, and the speed automatically with the stoves surface temperature.
- 🏘️ high efficiency: increase stoves efficiency, fuel saving, and make the room warmer quickly.
- 🏘️ coloration even after long time working under high temperature.easy to use: simply place the fan on the stoves. it is better place the equipment in the back or middle of the stoves.specification:material: aluminum alloysize chart:19cmx14cmx21.5cm/7.48inchx5.51inchx8.46inchpackage includes:1 fireplace fannote:please allow slightly errors due to manual measurement and ...
SHOWview product -
Product Highlights
- [advantages] unique design, heat driven, stove fan uses the heat from the furnace surface to generate its own power, distributing the heat from the furnace, quickly raising the temperature of the room, saving time, fast enough to make your room comfortable. wide applicability, whether wood burning stove, wood burning stove, fireplace, gas or pellet fuel stove, stove fan...
- [whisper quiet] the new design of the blade, high air volume, low noise. the noise is less than 25db, and it is very quiet when working. you will enjoy the warm air in the quiet and comfortable environment.
- [working principe] no batteries or electricity, hot blast stove fans are designed to circulate hot air produced by wood/coal stoves or particles operating at normal surface temperatures between 60°c and 350°c. this way effectively heating your room, hot air circulation, reduce consumption, energy saving and environmental protection. the fan can automatically wind speed ...
- [high qulity] innovative and durable design, made of anodized aluminum, which will not be rusty or corroded. safe operation, when the temperature is lower than 60°c(140°f), the fan slowly stops running. when close to the maximum operating temperature of 340°c(644°f), the bottom of the high temperature protection spring, the body is fully oxidized, high temperature does ...
- [easy operation and service] no need to assemble, just put it on top of the stove, and the fan will rotate as the temperature rises. if you still have any problems in the use process, please contact us directly to solve, we will be within 24 hours for you to answer, do not worry about quality problems.
SHOWview product -
Product Highlights
- 🏘️ feature: silent operate, less consumption, more efficiency .
- 🏘️ size chart:15cmx15cmx15.2cm/5.91inchx5.91inchx5.98inchair volume 180-210wind speed 800-1100rpmnoise operating temperature 60-350°c
- 🏘️ no batteries or electricity required: 5 sheet furnace fan uses heat from the furnace surface to,adjust its speed automatically with the furnace surface temperature .
- 🏘️ high efficiency: large,increase furnace efficiency, fuel consumption down, fuel saving, silent operate. and make the room warmer quickly .
- 🏘️ color: black
SHOWview product -
Product Highlights
- 🏘️ heating fans features: large , increase stoves efficiency with burner fewer fuels, silent operation. less consumption, more efficiency, decrease fuel consumption and make the room warmer quickly.
- 🏘️ size: 14cmx10cmx19.5cm/5.51inchx3.94inchx7.68inch
- 🏘️ no electricity required: the stoves fan uses heat from the stoves surface to , adjusts its speed automatically with the stoves surface temperature.
- 🏘️ quiet stoves fan: say goodbye to the terrible noise. usage on freestanding stoves with a normal surface temperature of between 65-350 degree centigrade (149-662 fahrenheit degree )
- 🏘️ coloration even after long time working under high temperature.saving and environmental protection: the heat powered stoves fan is designed to circulate warm air created by a wood/ pellet burning. fully utilize the heat from your wood stoves and disperse it to your room, and make the room warmer quickly.specification:
SHOWview product -
Coupon copied
