10 Best
Digital Smoker Controllers
-
Product Highlights- Multi function precise time programming for daily / weekly - minimum interval 1 minute
- Accurate to the minute control , superior relay & weekend exclusion (fri sat or sat sun) and weekly off programming
- World weekly programmable time switch with special edition extra heavy duty relay -lcd display - 20 times on/off daily
- New microprocessor controlled best quality guaranteed.used for automatic switching on/off for electronic sirens / street light / signage board / hydroponics / signalling / home automation etc
SHOWview product -
-
-
-
Product Highlights
- Output: 1 channel relay output, capacity = 10a
- Temperature control range: -50 ~ 110 c
- Package include :- 1pcs adapter 1 pcs 3 inch fan and w1209 digital thermostat module 1pcs dc pin
- You can diy incubator machine with the help of w1209 controller board and 3inch fan this is a diy kit for diying a incubator
- Combo of w1209 50~100 digital temperature controller thermostat with 3inch fan + 12v 1amp adapter + dc pin
SHOWview product -
Product Highlights
- It has control temperature modes between cool and heat by switch.
- Manual temperature calibration is available.
- An alarm outputs a warning sound when the temperature exceeds temperature limit or when the sensor outputs error.
- Temperature measuring range: -50 ~ 99°c
- Manual temperature calibration is available.
SHOWview product -
-
Product Highlights
- Output: relay contact capacity 10a 220v / 20a 12v / 20a 24v.
- Environmental requirements: -10-60°c , humidity 20%-85%rh; dimension:79mm*43mm*26mm; cutting size:73mm*39mm; sensor wire: 1 meter
- Power supply: 110v - 220v ac; color of displaying: red/blue; sensor: ntc10k waterproof sensor.
- Temperature control range:-55°-120°; resolution ratio: 0.1°c(-9.9-99.9); 1°c(other range)
- Measurement accuracy: ±0.1°c; control accuracy: 0.1°c
SHOWview product -
-
Product Highlights
- W1209: led display | inbuilt embedded micro-controller | ntc temperature sensor | no programming knowledge required | onboard relay | display current temperature | 3 digit 7 segment display || fan: perfectly fits on the extruder | noiseless performance | very low current consumption
- The w1209 digital temperature controller module can be used to measure and display temperature, turn any application on/off based on temperature reading. it can be used in appliances such as fire alarm system or auto cut off electric water heater. the fan is commonly used in system, panel box, etc. to keep the system cool.
- Robotbanao w1209 digital temperature controller module and ntc waterproof temperature sensor is a 12v temperature controller with 7-segment display. it has a 3 switch keypad for setting temperature and other parameters. the module has an ntc thermistor temperature sensing and has an accuracy of 0.1 c. the fan spins at ~2600 rpm and can move approximately 30cfm. it is fa...
- Dimensions: w1209(lxwxh):48x40x14mm | cable length:0.5 meter || fan(lxwxh):80x80x25 mm | wire length:20cm
- W1209: temperature control range(°c): -50 to +110 | resolution @-9.9°c to +99.9°c: 0.1°c | resolution @all temperatures: 1°c | accuracy: 0.1°c | refresh rate(s): 0.5 | supply voltage(v): 12 | measuring inputs: ntc10k | output type: 1 channel relay output | capacity: 10a | long pressing “+/-” will reset all values to their default || fan: input voltage:12vdc | current:0....
SHOWview product
Coupon copied
