8 Best
Dac For Raspberry Pis
-
Product Highlights- After using this expansion board, user can coordinate with the broadcast system (volumio，xbmc system etc.) to set up your own hifi player network
- Updated dac chip with bbti company’s pcm5122 chip. it has i2s port and you can use the i2c port to control the volume and the frequency parameter. it support 16 to 32 frequency data format. distortion and dynamic condition are very ideal. it supports the high 384 khz sampling frequency and dynamic range is 112db with distortion factor -93db
- Pifi digi / dac+ / hifi digital audio card pinboard for raspberry pi 3 2 model b b+
- Pcm5122 dac chip and i2s interface, perfectly compatible with the official raspberry pi pi hat size, pcb board with gold plating on the tall, curved traces (high-end hifi dac are using curved alignment), to better ensure the continuity of the impedance signal to reduce signal reflections and refractions
- With isolated power design, the raspberry pi power and dac part of the independent power supply are isolated. common ground without disturbing each other through the beads, it can get rid of the current sound.
SHOWview product -
Product Highlights
- Extended 2 x usb 2.0 port, 1x 1000 mbps ethernet port , 1 x audio stereoscopic input, 1 x audio stereoscopic output, 1x type c 5v/2a power input port.
- Limited by the usb 2.0 speed of pi zero. the actual speed of 1000 mbps ethernet port is around 320mbps. but much better than the 100mbps ethernetdesgin.
- Compatibility with all raspberry pi zero serials. pi zero, pi zero w, pi zero 2w. support all raspberry pi system.
- Comes with a 10mm thickness aluminum black alloy heatsink, u-shaped groove design to speed up heat dissipation.
- On-board ti stereo audio chip, perfect playback of 44.1 khz(cd quality) and 48 khz. support for volumio, moode, picoreplayer, libreelec music player system.
SHOWview product -
Product Highlights
- We enter the master mode for i2s instead of the rpi giving the clock on the line, the dac itself sends the clocks and rpi sends the data (file to be played).
- We use some good brand ldos on the market. in addition, we used two oscillators with very low jitter for clock units. on the analog stage we are using a film capacitor (not ceramic) for a quiet dc to
- Rpi-hifi-dac module is made to solve the problem of raspberry pi with audio files sampled at 44khz and multiple, too much jitter on i2s clocks.
- Rpi-hifi-dac is unique for we have implemented the design. first we separated the power on 3 channels and filter it: one for digital side, second for analog, third for the clocks.
- Note: software and document will be updated accoring to rpi kernel?please download from our website product page or wiki?you can find link from color page?
SHOWview product -
Product Highlights
- After using x920 board, user can coordinate with the broadcast system (such as volumio, runeaudio, osmc, xmbc(kodi), moode etc.) to set up your own hifi player network.
- Full hd audio up to 24 bit/192khz playback and class leading audio (112db snr, and 93db thd) function, integrated hardware volume control with ti's lp5907 ultralow noise voltage regulator for optimal audio performance.
- With dac all function pcm5122 chip and i2s input, x920 dac+ board is a perfect hifi / dac+ / hifi / full hd audio expansion board for raspberry pi 3 model b/ 2b / b+;
- X920 is available with rca, 3.5mm phone jack output connectors and built in ir receiver (vishay tsop34838);
- Powered by raspberry pi, no external power requirements, conforms to the raspberry pi hardware attached on top (hat) specification.
SHOWview product -
-
Product Highlights
- Dual low-jitter oscillators used for clock generation
- Full galvanic isolation between the raspberry pi and your dac on the electrical output
- Dedicated wolfson wm8804g digital chip and s/pdif interface chip supports up to 192khz/24bit resolution
- Two separate oscillators for 44.1 and 48khz provide the optimal clock frequencies for all sample rates.
- Bit-perfect output, audio data stream will not be modified in any way
SHOWview product -
Product Highlights
- The audio+ v2 works with previous version of raspberry pi 3 and 2 or raspberry pi zero version 1.
- The audio+ v2 is now using a very high quality no noise dac 112db audio stereo dac with 32-bit 384khz pcm.
- The audio+ v2 works with raspberry pi 4 or raspberry pi zero version 2.
- The audio+ v2 is fully compatible with the audio+ v1.
SHOWview product -
Product Highlights
- Acrylic case for innomaker hifi dac hat only, not support innomaker dac pro hat and other brand dac hat
- There are protection film on both sides of all acrylic plate. you need to peel it off before assembling the case.
- Packing list: 1 x acrylic case; 5 group screws.
- Acrylic case support pi4/pi3 b+/pi3/pi2
- For the case assemble,please refer to the dac hat usermanual
SHOWview product
Coupon copied
