10 Best
Dac Amplifiers
-
Product Highlights- Although tiny, the dragonfly is every bit as impressive as many full-size dacs. asynchronous transfer and twin clocks ensure perfectly timed and controlled digital information enters the dac, for a highly accurate and precise sound quality. compared to a computer/smartphone/tablet's headphone output you'll notice a more dynamic sound with more detail and openness. in es...
- At the heart of dragonfly black is a 32-bit ess sabre 9010 dac that uses a sophisticated minimum-phase digital filter to provide more naturally detailed and dynamic music. this high-performance dac is typically found in today's higher-end cd and blu-ray players. dragonfly black will accept almost any audio you want to play on your computer and make it sound dramatically...
- The audioquest dragonfly black is a sleek, flash-drive sized usb dac+preamp+headphone amp that delivers far superior sound by bypassing the poor quality sound card that is built into your apple ios and android smartphone/tablet or windows and mac laptop/desktop computer; turning your device into a true high-fidelity music source. its 3.5mm port is designed specifically ...
- Audioquest and dragonfly designer gordon rankin worked alongside microchip technology to develop a new high-performance, full-speed usb microcontroller solution that delivers improved signal-to-noise ratio and significantly lower power consumption. drawing 77% less current than the previous microcontroller, the new microchip pic32mx microcontroller enables true compatib...
- Despite its tiny size, the dragonfly will play a wide variety of music files. twin clocks ensure perfect playback of 44.1 khz (cd quality), 48 khz, 88.2 khz and 96 khz. as a final neat touch, the dragonfly logo glows various colours to indicate the file frequency: green for cd (44.1 khz), blue for 48 khz, amber for 88.2 khz and magenta for 96 khz. make the most of your ...
SHOWview product -
Product Highlights
- Professional audio line. adopts the advanced sealed step potentiometer with good rotation resistance and good hand feeling. the circuit is designed as arc routing to avoid current glitch.
- High performance. converts pc-usb/coaxial/toslink digital audio signals to analog l/r audio and 6.35mm headphone. and supports sampling rate at 32, 44.1, 48 ,96 and 192khz. 24-bit s/pdif incoming bit stream on left and right channels.
- Superior hardware performance. digital receiving chip dir9001 with high-power and low distortion independent headphone amplifier circuit allows to easily drive the 300ohm headphones, and adopts many high-grade resistors and capacitors to optimize sound quality and improve audio performance to hifi level.
- No offset tone, adc volume control. supports headsets with different sensitivity, and the smooth audio control meets various requirements, to better drive the headsets with high impedance or low sensitivity, to reduce the ground noise.
- Noise-free transmission. provides electromagnetic-noise-free transmission and specially designed for movies, tvs, etc., bringing you a fantastic experience.
SHOWview product -
Product Highlights
- Equipped with xmos xuf208 usb receiver chip, akm ak4493 dac, op-amps opa1642 and flagship ti tpa6120
- Multiple interfaces - headphone jacks (6.35mm) rca outputs plus usb coaxial, optical and line-in inputs
- Country of origin: china
- Ak4493 dac chips for the ultimate in decoding performance, supporting up to 768khz/32bit and native dsd
- Extremely powerful headphone amplification for a total power output of up to 1.5 w under a 32ω load and up to 20vpp at 300ω
- More accurate adc volume control plus gain and bass switches
SHOWview product -
Product Highlights
- ♫ high performance - up to 32bit 384khz sample rate, bit-perfect dsd512, and -118db thd+n (line-out).
- ♫ balanced rca - next-generation "balanced rca line-out" with 3-pin output, sets a new interface standard for the hi-fi industry.
- ♫ dimension：120mm(l） 121mm（w) 30mm(h）
- ♫ hardware mqa decoding - xmos xu216 processor for full mqa decoding, enabling next-gen "original master quality" web streaming and audio playback.
- ♫ multiple interfaces-dual headphone jacks(3.5mm and 4.4mm)
SHOWview product -
Product Highlights
- [variety of inputs]: supports coaxial/optical/rca line-in inputs, with optical and coaxial inputs supporting up to 192khz inputs, k5pro ess amplifier is convenient for connecting various music players and digital interfaces.
- [easily handles low or high impedance headphone]: for a total power output of up to 1.5 w under a 32ω load, and up to 20vpp at 300ω, k5pro ess desktop amplifier can easily handles any low or high impedance headphone.
- [high-performance dac&usb decoding chip]: the k5pro ess headphone amps achieves new heights in sound quality and comes with a high level of resolution sound. es9038pro with 32-bit processing, along with the xuf208 usb decoding chip with 768khz and dsd256 inputs, and it also upportes mobile phone connectivity.
- [variety of outputs]: supports 6.35mm (1/4 in.) headphone out/rca line-out outputs, the rca line-out line signal is adjustable up to a maximum of 2vrms, so the k5pro ess portable dac can be used with a variety of active speakers and external amplifiers.
- [various headphones with all kinds of sensitivities]: with adc volume adjustment, k5pro ess portable headphone amplifier allows you to smoothly adjust volume at extremely fine increments without any undesirable noise nor with any channel imbalances. it means you could comfortably use various headphones with all kinds of sensitivities with it.
SHOWview product -
Product Highlights
- Max power output up to 1400watts: experience rich audio details with a powerful output of up to 1400mw and easily drive high impedance hifi headphones up to 350 ohms. recommended for headphones with 8-350 ohm impedance.
- A sleek and compact desktop accessory with an aluminum alloy body. its small size and slim design will bring a clean and tidy look to your workspace. upgrade your desk with this visually appealing addition
- Revitalize your television or computer with this incredible decoder, and experience a whole new level of sound. whether you're at home or in the office, paired with speakers or headphones, you'll be able to enjoy delightful and captivating music.
- [variety of inputs+outputs]: supports usb/coaxial/optical inputs, with optical and coaxial inputs. 4.4mm/ 6.35mm (1/4 in.) headphone out/rca line-out/ coaxial outputs.
- Va display: the high-definition va display screen is carefully customized with high contrast and long lifespan. it can provide a clearer presentation of the current status of the device, such as sampling rate, volume, gain, output mode, etc., making your operation simpler and more intuitive.
SHOWview product -
Product Highlights
- [simply reliable usb power]: the new k3 headphone amplifier adopts the modern usb type-c input interface for a more reliable and stable connection, including that of power. however, care to ensure an uncompromised power supply doesn't stop there – the new k3 implements overvoltage protection (ovp) and a double-filter circuit to ensure power supply stability, while the d...
- [coaxial/optical digital outs]: the xmos usb receiver chip in the new k3 directly converts any usb audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
- [up to 384khz/32 bit pcm and native dsd256]: equipped with an xmos usb receiver chip, the new k3 headphone amps is capable of decoding up to 384khz/32 bit pcm and native dsd256 – the same as many dacs costing much more. the new k3's dual crystal oscillators ensure that any digital audio signals being fed into the dac are exactly correct for further enhanced sound qualit...
- [two modes for your choice]: sometimes, you may not have access to a device that can connect to the new k3 via usb audio class 2, you can go to usb audio class 1 mode with just the flick of a switch. in high-performance applications, you can use the 2.0 mode to enjoy up to 384khz/dsd 256 decoding. · for certain situations, you can use the 1.0 mode to enjoy up to 96khz/2...
- [different connection options for different scenarios]: 1. connect it to a desktop computer 2. use the driverless 1.0 mode for business trips 3. make it a digital turntable connected to an external decoder 4. connect it to a speaker, using the new k3 as a dac
SHOWview product -
Product Highlights
- Nfca circuit ：the new dx3 pro+ has the nfca circuit optimized for this unit, giving the ultra low noise and distortion. it pairs with high sensitivity iems and power hungry high impedance headphones nicely.
- Pa3s is the best power amplifier for dx3 pro+： pa3s has rca+trs balanced inputs. when used with dx3 pro+, the trs balanced input can be used to input other audio sources. the output power of 80w x 2@4ω, 10%thd+n, 65w x 2@4ω, 1%thd+n can be adapted to most situations where speakers are used.
- Bluetooth 5.0 ldac transmission ：dx3pro+ has the certification of hi-res audio wireless and ldac. it uses newest qcc5125 chipset to support ldac/aac/sbc/aptx/aptx ll/aptx hd protocol. to get even better sound quality from bluetooth, we abandon the built-in dac of qcc5125 and connect its digital signal to es9038q2m to decode.
- Pre-amplifier function ：adapt to different usage scenarios, dx3 pro+ has 4 output modes: headphone amp, headphone amp+ line out, dac, and pre amplifier.
- Bluetooth headphone amp / bluetooth dac application： connect the bluetooth of the phone, tablet or notebook to dx3 pro+, and connect the power amplifier, active speakers or headphones to the dx3 pro+'s output, then dx3 pro+ becomes your bluetooth headphone amp / bluetooth dac. if your device supports ldac transmission, you will get even better experience.
SHOWview product
Coupon copied
