10 Best
Compression Bulkhead Fittings
-
Product Highlights- Size information: the required hole size of the flexible tank adapter is about 1.93 inch and can be inserted into 1" pipe with 3/8" to 3/16" wall thickness; please refer to figure for specific dimensions
- Easy to install: insert the seal after cutting a hole in the wall of a tank or other surface; the pipe is then coated with a slippery detergent, such as dish soap, and pushed into the seal
- What can you get: the package comes with 4 pieces of flexible tank adapters, enough to meet your daily use and replacement demands, you can also share them with your friend
- Reliable material: made of quality tpv material, the flexible tank adapter has good wear resistance, aging resistance and air tightness, can withstand pressure and suction, acid, oil, grease, sewage, waste, heat and cold, serving you for a long time
- Requiring no component parts: the flexible tank adapter with a single injection molded part requiring no component parts, bringing much convenience for your life; if installed correctly, you do not need other glue onto the pipe
SHOWview product -
Product Highlights
- Fitting connects to tubing on either side of a bulkhead
- Hex nut construction for tighter, leak-free connections
- Bulkhead union mounts on a wall or bulkhead to allow connections on either side of barrier
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. thread size: 9/16-24.
SHOWview product -
-
Product Highlights
- Bulkhead union fitting allows tube connection on either side of barrier.
- Use with copper, brass, aluminum, or plastic tubing.
- Fit for tube od: 1/4".
- Made of 316 stainless steel, with high strength and corrosion resistance, rustproof.
- Widely used to connecting pipes or fittings of different types such as garden hose, water pipe, oil tube, fuel pipe, etc.
SHOWview product -
Product Highlights
- Material: the bulkhead fitting is made of high quality stainless steel ,high strength and corrosion resistance
- Large washer: two larged and thickened silicone washers provide a more stable seal
- Size: used to connect 1.5"tc(50.5mm)
- Installation: just drill a 41mm hole in the kettle
- Widely used:suitable for coke kegs, soda kegs, beer kegs, kettles, etc.
SHOWview product -
Product Highlights
- The connection is firm, high pressure resistance, with tightness and the repeated installation, simple and convenient installation and maintenance, and the work is safe and reliable!
- Selected high-quality stainless steel 316 materials, the inspection indicators are in line with the standard.
- Break the traditional installation method, double ferrule type installation is environmentally friendly, reusable, easy to operate, and can be removed freely.
- The surface of the joint is finely polished by a special process, the hand feel is smooth and delicate, the interior is clean and bright, and the ruler can be accurately controlled.
- No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding.
SHOWview product -
Product Highlights
- No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding
- Break the traditional installation method, double ferrule type installation is environmentally friendly, reusable, easy to operate, and can be removed freely
- The connection is firm, high pressure resistance, with tightness and the repeated installation, simple and convenient installation and maintenance, and the work is safe and reliable!
- Selected high-quality stainless steel 316 materials, the inspection indicators are in line with the standard
- The surface of the joint is finely polished by a special process, the hand feel is smooth and delicate, the interior is clean and bright, and the ruler can be accurately controlled
SHOWview product -
Product Highlights
- These are extremely high quality pieces machined out of 304ss and polished to perfection (except for the locknut which is cast finish 304ss
- Add a 2" tc flange to virtually any vessel!just drill a 48mm hole and tighen the locknut with 2pcs food grade gaskets.
- The 2" triclover (tc) weldless bulkhead flange allows you to add a tc port to any tank or kettle with absolutely no welding or soldering
- The front of the flange does not have flats for a wrench. the easiest way to hold the flange for tightening is to clamp any other tc parts on with the gasket and clamp. once tight, you can insert a long rod or screw driver into the hole of the wingnut.
- The silicone o-ring is included and gets captured in a groove like our other true bulkheads
SHOWview product -
Product Highlights
- Material: 304 stainless construction and high heat compatible silicone gaskets
- Tight seal: drill a hole on any vessel and tighen the locknut with 2pcs food grade gaskets
- Connection size: fits 1.5”tc(50.5mm ferrule od)
- Easy to install: tri clamp weldless bulkhead flange allows you to add a tc port to any tank or kettle without welding
- Application: suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12 inch.
SHOWview product -
Product Highlights
- 304 stainless construction and high heat compatible silicone gaskets.
- Works on kettle as small as 12" in diameter.
- Add a 1.5" tc flange to virtually any vessel!just drill a 41mm hole and tighen the locknut with 1pcs extra food grade gasket..
- The front of the flange does not have flats for a wrench. the easiest way to hold the flange for tightening is to clamp any other tc parts on with the gasket and clamp. once tight, you can insert a long rod or screw driver into the hole of the wingnut.
- Weldless design ideal for ftss and brew bucket flat lid pressurized transfers
SHOWview product
Coupon copied
