10 Best
Cen-tech Clamp Meters
-
-
Product Highlights
- Ncv detection function: non-contact voltage detection effectively check electrical status through measuring em field intensity without touching any wires; the ncv button lies on the left side. simply place your thumb on it and push.
- Advanced designs: the multimeter is easy to carry and store with a compact design and has the characteristics of high reliability, automatic range, handheld clamp meter, etc.
- True-rms clamp meter: this multimeter can accurately measure ac current, ac/dc voltage, resistance, capacitance and also provides diode, continuity test. true rms for accurate measurements on non-linear loads. easy to use for labs factories and household.
- Hold function & led flashlight:shot press the hold button to capture and hold a stable measurement. it is convenient to illuminate a dimly lit area when long-pressing the flashlight button.
- Safety service:safety standard iec 61010-1, cat iii 600v. double insulation. use high-quality material to prevent electric shock harm.
SHOWview product -
-
Product Highlights
- ⭐ac current upto 1000a (50hz ~ 60hz) ⭐ac voltage upto 750v (45hz ~ 450hz) ⭐dc voltage upto 1000v
- ⭐audible continuity ⭐data hold low battery ⭐indication jaw opening : cable dia. 53mm (max.
- ⭐3½ digits⭐ 2000 counts⭐ manual ranging
- ⭐resistance upto 20kω ⭐over load protection⭐ over volt protection
- ⭐test leads x 1 pair ⭐9v battery x 1 pc ⭐instruction manual x 1 pc ⭐carrying case x 1 pc
SHOWview product -
Product Highlights
- Flashlight for accessing dark areas. relative measurement. data hold.
- Resistance: 0-600/6k/60k/600k/6m/40mω, accuracy: ± (0.8%+3). capacitance: 60nf/600nf/6uf/60uf/600uf/6mf/30mf, accuracy: ± (3.5%+20). frequency: 0-10/100/1k/10k/100k/1m/10mhz, accuracy: ± (0.1%+3). temperature: -20°c to 1000°c, accuracy: ± (1.0%+5). diode & continuity test.
- Ac current 600a (no dc current), voltage ac (750v) / dc (1000v).
- 3 5/6 digit, 6000 count, backlight lcd. t-rms. auto ranging. ncv.
- This is not a dc clamp meter. please order dt-725 for ac/dc.
SHOWview product -
Product Highlights
- T-rms, auto ranging, ncv, jaw size 33mm. high current clamp meter.
- Ac voltage: 0-6/60/600/750v; accuracy: ± (0.5%+3). dc voltage: 0-6/60/600/1000v; accuracy: ± (0.8%+3). ac current: 0-60/600a; accuracy: ± (2%+30).
- 3-5/6 digit, 6000 count, backlight lcd, flashlight for accessing dark areas.
- Capacitance: 60nf/600nf/6uf/60uf/600uf/6mf/30mf; accuracy: ± (3.5%+20). frequency: 0-10/100/1k/10k/100k/1m/10mhz; accuracy: ± (0.1%+3). temperature: -20°c to 1000°c; accuracy: ± (1.0%+5). diode & continuity test.
- Ac current: 0-60/600a; accuracy: ± (2%+30). dc current: 0-60/600a. resistance: 0-600/6k/60k/600k/6m/40m ohms; accuracy: ± (0.8%+3). not meant for low current measurements - please check metravi leakage current clamps for ma measurements.
SHOWview product -
Product Highlights
- Ac voltage: upto 600v trms & dc voltage: upto 600v dc
- Frequency: upto 4mhz, resistance : upto 40mω , capacitance: upto 4mf, temperature: 750c, continuity buzzer, diode checking, ncv (non contact voltage detector)
- Display: 4000 counts autorange
- Ac : 0.1a to 40a to 400amp ac trms; jaw size 24mm
- No it cannot measure dc current
SHOWview product -
Product Highlights
- Ac voltage: 600mv～750v true rms and dc voltage: 600mv～1000v dc
- Frequency: upto 10mhz, resistance : upto 60m , capacitance: upto 10mf
- Display: 6000 counts
- Ac and dc current : 0.01a ～60a～1000amp trms
- Temperature, continuity buzzer, diode checking and ncv (non contact voltage detector)
SHOWview product -
Product Highlights
- Multi-function: this digital clamp meter can do ac current measurement(600a) (this clamp meter can only measure one current conductor at a time), ac and dc voltage measurement, circuit continuity/resistance/diode measurement and frequency measurement. different functions meet your different measurement needs
- Diagnostic efficiency: widely used by electricians and technicians, clamp meters facilitate efficient troubleshooting and diagnostics in electrical systems without the need to interrupt the circuit.
- User-freindly operation: equipped with clear displays and intuitive controls, clamp meters are designed to be user-friendly, providing accurate readings and enhancing overall ease of use for professionals in the field
- Non-contact voltage detection: with the ncv non-contact voltage function, you can put the meter close to the power supply to detect whether there is ac voltage, without directly contacting the test probe with a charged object. it can be used to find live wires buried in walls or to find buried broken wires, etc. suitable for higher ac voltage
- Jaw design: the jaw allows for easy and secure attachment to conductors, ensuring a stable connection and accurate readings during measurements.
- Easy to read-the ac/dc clamp meter has a backlit screen and led flashlight so you can see the readings when working in dim or low-light conditions,like electrical closets, under buildings, behind appliances, and in other enclosed spaces,convenient led flashlight illuminates a dimly lit area.
SHOWview product
Coupon copied
