10 Best
Catalytic Converter Tests
-
-
Product Highlights
- Modified motorcycle exhaust pipe extension 51 mm adaptor used at the time of attaching exhaust muffler to less dimension pipe to scooter
- Easy installation install by professional
- Reduce deep note sound , adjustable and removable
- Racing parts should be installed by a professional mechanic, note - before placing an order, please make sure our product fits for your motorcycle
- Pack of 1, catalytic converter vehicle compatibility: ktm/yamaha/hero/bajaj/honda all model fitting
SHOWview product -
Product Highlights
- This is a very professional and durable automotive exhaust back pressure tester suitable for most vehicle applications on the market.
- Fast and accurate, time- saving, precise and efficient, it will be your best choice for testing tools.
- The tester can complete your test work well and help you better understand your car information.
- Reasonable structure, simple operation, convenient application, can help you test quickly and accurately.
- Fine workmanship, excellent texture, simple and practical, it can test the front pressure of the catalytic converter to determine whether the exhaust is blocked.
SHOWview product -
Product Highlights
- Modified motorcycle exhaust pipe extension 51 mm adaptor used at the time of attaching exhaust muffler to less dimension pipe to scooter
- Reduce deep note sound ,racing parts should be installed by a professional mechanic, note - before placing an order, please make sure our product fits for your motorcycle reduce deep note sound
- Vehicle compatibility: ktm/yamaha/hero/bajaj etc. all model fitting
- Easy installation install by professional
- Your motorcycle reduce deep note sound
SHOWview product -
-
Product Highlights
- Easy to use: the exhaust back pressure kit connects to exhaust system’s oxygen sensor; oxygen sensor adapters with exhaust back pressure gauge are m12 and m18; 6 foot hose with pressure gauge tester allows users to test from driver’s seat
- Diagnose problem areas: the exhaust pressure gauge allows you to see if you have a clogged catalytic converter or an obstructed muffler; back pressure gauge helps you diagnose problems so you know the next steps to take
- Safety first: the catalytic converter tester allows you diagnose problem areas in your exhaust system’s back pressure; get crucial knowledge of your vehicle’s exhaust system with exhaust gauge; prevents bad engine performance
- Accurate gauge: the exhaust backpressure tester's 2-1/2 inch gauge has easy-to-read markings in psi and bar; multi-color bar indicates good or bad status; gauge has high visibility markings for easier reading
- Transportable: the back pressure test tool comes in a sturdy and solid carrying case for easy transportation; exhaust back pressure gauge's case is perfect for the mechanic on the go; case protects from damage
SHOWview product -
-
Product Highlights
- 👍👍👍【accurate gauge】the exhaust back pressure tester's 2.5" inch gauge has easy-to-read markings in psi and bar. 3 colors to indicate the good or bad status, the highly visible mark greatly helps users to directly read the data. the exhaust pressure tester is tested at idle and 2500rpm. pressure should be less than 1.25psi at idle and less than 3psi at 2500rpm.
- 👍👍👍【complete accessories】the special 2.5" gauge with rubber protector has two multi-colored bands, with pressure shown in psi and bar. and the adapter has m12 and m18 threads, allowing the technician to test the exhaust gas without back pressure through the adapter. fully equipped for a variety of models.
- 👍👍👍【professional diagnostic tool】the catalytic converter tester is designed to help you quickly and accurately understand the condition of your vehicle's exhaust system, allowing you to diagnose problem areas in your exhaust system back pressure so you can take your next steps. use this exhaust gauge to gain vital knowledge about your vehicle's exhaust system and preven...
- 👍👍👍【easy to use】just disconnect the sensor wires and remove the sensor. install the sensor adapter. and then push the hose end onto the adapter and make the pressure test. the adapter with exhaust back pressure gauge are m12 and m18. start car, read data, 6ft hose with gauge tester allows user to test from driver seat.
- 👍👍👍【warmly reminder】the pressure gauge is checked and calibrated to ensure accurate test results. if the meter pointer is not in the initial state "0", the meter may have been affected during transportation. you can remove the case and adjust the pointer to "0", this will not affect the test results.
SHOWview product -
Product Highlights
- 【accurate gauge】the exhaust back pressure tester's 2.5" inch gauge has easy-to-read markings in psi and bar. 3 colors to indicate the good or bad status, the highly visible mark greatly helps users to directly read the data. the exhaust pressure tester is tested at idle and 2500rpm. pressure should be less than 1.25psi at idle and less than 3psi at 2500rpm.
- 【complete accessories】the special 2.5" gauge with rubber protector has two multi-colored bands, with pressure shown in psi and bar. and the adapter has m12 and m18 threads, allowing the technician to test the exhaust gas without back pressure through the adapter. fully equipped for a variety of models.
- 【professional diagnostic tool】the catalytic converter tester is designed to help you quickly and accurately understand the condition of your vehicle's exhaust system, allowing you to diagnose problem areas in your exhaust system back pressure so you can take your next steps. the pressure should be lower than 1.25psi at idling speed, and lower than 3psi at 2500rpms. use ...
- 【easy to use】just disconnect the sensor wires and remove the sensor. install the sensor adapter. and then push the hose end onto the adapter and make the pressure test. the adapter with exhaust back pressure gauge are m12 and m18. start car, read data, 6ft hose with gauge tester allows user to test from driver seat.
- 【warmly reminder】the pressure gauge is checked and calibrated to ensure accurate test results. if the meter pointer is not in the initial state "0", the meter may have been affected during transportation. you can remove the case and adjust the pointer to "0", this will not affect the test results.
SHOWview product -
Coupon copied
