6 Best
Car Video Switchers
-
Product Highlights- [ 4 video inputs ] --- left-view, right-view, rear-view and front-view, each group of video inputs has a camera + 12v. four video outputs are shared with one video channel with the same power trigger line. the output shares a video channel and outputs a power line that triggers the screen.
- [ circuit ] --- the car backup camera splitter switch has designed a product power supply circuit and a camera power supply circuit to protect the camera and on-board circuits.
- [ easier operation ] --- when each camera receives power from the corresponding headlight, the display can show the correct video channel by turning on the left and right indicators or backup. this backup camera switch adopts wireless remote control, which has easier operation, convenient for using.
- [ precise design ] ---- this car video switch is designed to add more video inputs for cameras when it's connected with video interface for different car models. wide voltage power input 8-16v, 24v to 12v need to be equipped on large car. color definition of the line: 12v power supply positive (red line), gnd negative (black line), left turn signal (white line), right t...
- [ easier reversing ] --- it can detect the left and right turn of the car and switch to the corresponding video channel; when out of the reversing state, the video source is switched to display front view 7s (this function can be selected according to the situation), and then returns to the default video output off state.
SHOWview product -
Product Highlights
- Wide application: widely used, suitable for vehicles with monitor and reversing camera, it has no impact to oringal monitor.operating voltage: 916v
- Working principle: after the engine starts, the system will activate the monitor and front camera to check the front view for 8 seconds, and then turn it off. car video switcher
- Explanation: press the control switch to enter the front panel mode, in this mode, the system will always monitor and activate the camera's front panel. press the control switch again to exit the mode. for switcher camera frontale
- Easy to install: easy to install, but professional installation is highly recommended. no need for complicated tools, easy to use.
- Automatic function: when reversing, the system will automatically activate the rear view camera and switch to the front view of the camera within 15 seconds, and then stop. for backup camera switch car camera switch box
SHOWview product -
Product Highlights
- 2.premium quality : the video switcher is made of super high-quality abs,which is long-lasting durability and reliability,insures long life service and strong durability. in order to make sure our video switcher work well all the time.
- 4.easy to install:the video signal switcher is easy to install,easy to install, so as to bring much convenience for you. adopt wireless remote control, which has easier operation, convenient for using. convenient for using.you can replace the old or broken one directly.
- 5.purchase service: we value the shopping experience and satisfaction of each customer, so we provide technical support. if the product install or quality have any problem, please contact us in time.we will solve it as soon as possible.
- 1.feature: this switcher is designed to add more video inputs for cameras when it's connected with video interface for different car models.four video outputs are shared with one video channel with the same power trigger line.
- 3.good : the video capture card device itself has designed the product power and the camera supply circuit, carries on the to the camera and the vehicle circuit.when each camera receives power from the corresponding headlight, the display can show the correct video channel by turning on the left and right indicators or backup.
- Product detail: built to meet standard specification, strictly follow factory quality control.fine workmanship, wear‑resistance and the service life is longer.
SHOWview product -
Product Highlights
- ✔️ with one-key mute button and no need external power required.
- ✔️package includes:1 piece stereo audio bi-directional switcher
- ✔️ 2 x 1/1 x 2 l / r stereo audio switch audio bi-directional switcher.
- ✔️ funtion: press up to select (in/out)1 ; press down to select (in out)2 .input and output frequency range: 20hz ~ 20khz.
- ✔️ kindly refer the product description before buying the product.
SHOWview product -
Product Highlights
- Practical and useful: when the engine is started, the system activates the monitor and the front camera to check the front view for 8 seconds, then turn it off.when reversing, the system automatically activated rear view camera, and switches to the front view of the video camera in 15 seconds, then stops.
- Easy to install and alternative use: simple installation, no complicated tools required.
- Great and practical role: widely used, suitable for vehicles with monitor and reversing camera, it has no impact to oringal monitor.
- Features: push the control switch to enter the front mode, in this mode, the system will monitor and activate the front of the camera at all times. exit the mode by pressing the control switch again.
- Product detail: built to meet standard specification, strictly follow factory quality control.fine workmanship, wear‑resistance and the service life is longer.
SHOWview product -
Product Highlights
- ★ built-in protection energy: the smart video switcher 4 to 1 is designed with product power supply and camera power supply protection circuit to protect the camera and vehicle circuit. prevent the danger of the machine from overheating and hot, and improve the healthyty of use.
- ★ four outputs: using the same power trigger line, one video channel shares four video outputs. one video channel with the same power trigger line shares four video outputs. left view, right view, rear view and front view, each group of video input has a camera + 12v.
- ★perfect compatibility: this switcher is designed to add more video inputs to the camera when connected to different types of video interfaces. large cars need to be equipped with 8-16v, 24v to 12v wide voltage power input
- ★remote control: the video signal switcher adopts a wireless remote control, no quiet distance operation is required, and the operation is simple and convenient. comes with cr2025 remote control battery.
- ★working principle: when each camera is powered from the corresponding headlight, the output shares a video channel and outputs a power cord that triggers the screen. the monitor can display the correct video channel by turning on the left and right indicators or the backup monitor.
SHOWview product
Coupon copied
