10 Best
Brake Fluid Moisture Testers
-
Product Highlights- 🔬 universal fit --- universal probe common fit for most vehicle using dot4, dot3, dot5 brake fluids/liquid/oil.
- 🔬 instant result --- only takes seconds to know the results,test the car brake fluid quality quickly to check whether it's qualified, very easy to use.
- 🔬 high precision safety driving --- high quality probe privde high accuracy result, remind you do current maintenance and escort your driving.
- 🔬 easy comfirm --- 3 color led display display 5 level brake fluid status, easy and clear read under sun or night. never limited by the enviroment.
- 🔬 scope of application --- it's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops.
SHOWview product -
Product Highlights
- 5leds to indicate percentage of water in the brake fluid
- Press the button to turn on, the green led will light up
- Ideal tool for check brake fluid quality. it is commonly for professional use in automotive repair or servicing shops.
- Automatically power off
- Insert the tester into reservoir for one second then the test result will indicated by leds
SHOWview product -
-
Product Highlights
- [wide application]: this brake fluid tester can be used in most cars; suitable for testing the moisture content in dot-3, dot-4 brake fluid, widely used in workshops, auto repair shops, etc.
- [easy to read]: percentage reading next to led light on brake fluid test pen, maximum reading should be the result of brake fluid test when multiple leds are lit. (red means the brake fluid needs to be replaced immediately, green means it is in good condition, and yellow means it is in acceptable condition but needs to be replaced.)
- [high quality]: the brake fluid test pen is made of metal probe material, which is oil resistant, oxidation resistant and not easy to corrode.the shell is made of matte abs plastic, good anti-skid, compact and easy to store, good body texture.
- [function]: brake fluid tester pen can quickly check the health status of your car's brake fluid, provide more accurate test results, and remind you to replace the brake fluid when necessary, avoid traffic accidents, make your driving safer.
- [easy to use]: brake fluid detector is easy to use. push the button, insert the tester into the liquid reservoir, and it only takes a few seconds to display the results through the led, making it very easy to use.
SHOWview product -
Product Highlights
- [scope of application]: this brake fluid tester is suitable for testing the moisture content in dot-3, dot-4, dot-5.1 brake fluid. also can used for personal workshops, repair shops and dealer workshops.
- [easy to read]: red means the brake fluid needs to be replaced immediately, green means it is in good condition, and yellow means it is in acceptable condition but needs to be replaced.
- [high quality]: this brake fluid tester pen adopts high-quality metal probe, oil resistance, oxidation resistance, not easy to corrode, abs shell, good body texture, non-slip durable.
- [function]: brake fluid tester pen can quickly check the health status of your car's brake fluid, provide more accurate test results, and remind you to replace the brake fluid when necessary, avoid traffic accidents, make your driving safer.
- [easy to use]: the brake fluid moisture analyzer, lightweight and easy to carry, press the button, insert the tester into the liquid storage pool, just a few seconds can be displayed through the led results, very convenient. if you do not use it within 12 seconds, it will automatically shut down, saving power.
SHOWview product -
Product Highlights
- 💭[universal fit --- universal probe common fit for most vehicle using dot4, dot3, dot5 brake fluids/liquid/oil
- 💭[instant result --- only takes seconds to know the results,test the car brake fluid quality quickly to check whether it's qualified, very easy to use
- 💭[high precision safety driving --- good quality probe privde high accuracy result, remind you do current maintenance and escort your driving
- 💭[easy comfirm --- 3 color led display display 5 level brake fluid status, easy and clear read under sun or night. never limited by the enviroment
- 💭[scope of application --- it's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops
SHOWview product -
Product Highlights
- 🌠 widely applicable - this brake fluid moisture tester can detect the moisture content in dot 3, dot 4 and dot 5.1 brake fluid, suitable for most cars. it is perfect for personal garage, professional repair store use of automotive specialty tools, can also be used for intelligent identification of zero fire wire, broken wire finding, high and low sensitivity switching.
- 🌠 moisture detection - immersed the metal part of the detecting head into the liquid for 3 seconds until the display stabilizes, display 0~2 percent, green backlight, brake fluid can still be used. display 2~3 percent, the backlight is yellow and beeps slowly, please change the brake fluid. greater than 3%, bright red backlight, and buzzes rapidly, please change the bra...
- 🌠 premium quality material - the brake fluid tester housing is made of thickened abs material and the testing head is made of sturdy metal material with excellent craftsmanship. it has excellent oil resistance, heat resistance, wear resistance and insulation. there is also an anti-fall design, so that you are not easy to damage during use, it is a must-have automotive t...
- 🌠 automatic power off - our testers have an automatic power-off function, when no concentration is detected within 5 minutes, the meter will automatically power off to prolong the battery life. and when the battery voltage is lower than 2.6v the display will prompt, lower than 2.4v, the detector will automatically power off, then you need to replace the battery in time!
- 🌠 warm tips - batteries are not included in our automotive brake fluid tester, you need to buy them by yourself. check the probe for dirt or breakage before use, when using, the metal part of the detector pen must be completely immersed in the liquid, after testing, please clean the probe head first and keep it dry. protect the detection head in order not to affect your...
SHOWview product -
Product Highlights
- Extensive application: brake fluid pen tester support most of the vehicle with dot3 dot4 car brake fluid, this brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops.
- Easy operation: brake fluid liquid tester pen requires only install the lr03 aaa 1.5v battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by leds in a few seconds,simple and fast, the test pen will automatically power off after about 15 seconds of inactivity to save power.
- Useful brake fluid tester: hydraulic fluid liquid oil moisture analyzer can check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive.
- Simple design: brake fluid test have 5 led indicators show the percentage of water in the brake fluid, quickly and accurately, the tester pen is compact and portable, with a non-slip material and nickel-plated metal probe, which is oil-proof and oxidation-proof, more wear resistant and stable than nylon materials.
- Note: if the green led of the brake fluid detection pen no longer lights up after pressing the button, replace the battery, after each use, clean the test probe with tap water, this can better prevent corrosion and protect brake fluid tester and save power.
SHOWview product -
Product Highlights
- You can test dot3, dot4, dot5.1 type of brake fluid where the moisture content in the liquid will be tested indicating the purity of the fluid.
- With a low battery indicator, you are provided with a 190 mm long metal detector that can be twisted for testing brake oil quality.
- Brake fluid tester helps to test the quality of brake fluid to ensure your driving safety. light in weight the product comes with carry box that makes it easy to use, store and carry the product anywhere.
- If lcd screen shows a value of less than 0.1 percent, it indicates that the purity is extremely high, less than 1% indicates that the state is in good condition, less than 2.5% indicates that the state is ok, and that the brake oil needs to be replaced if indicated more than 3%.
- There is an alarm function that can be turned on or off. when turned on the alarm will be issued in case when oil needs replacement.
SHOWview product -
Coupon copied
