7 Best
Battery Amp Hour Testers
-
Product Highlights- Consist of dc voltmeter, load resistor and testing clip
- Rated capacity of battery to be tested: 4 - 500ah
- Portable battery tester which can check the capacity condition of different types of batteries from 4 to 500ah
- Rated voltage of battery to be tested: 2, 6, 12v dc
- The state of the battery is indicated on the meter dial as 'full' (white), 'normal' (green), 'recharge' (yellow), 'discharged' (red) directly
SHOWview product -
Product Highlights
- This battery load tester is fitted with a 3.5 digit led to display battery voltage, a push switch to apply the test load, a rocker switch for selection of load and 3 leds to indicate the condition of the battery during load test. this tester is powered by the battery under the test. suitable for testing 12v batteries 2.5 to 14 ah. load to impose 12a, 45a size : 28 x10 x...
- Suitable for load test on two wheeler's batteries from 2.5ah to 14ah
- 12 months warranty is extendable upto 18 months.
SHOWview product -
Product Highlights
- Vehicle compatibility : petrol car, diesel car, suv, scooter, motorcycle, pick-up van, tempo, truck, bus, boat, tractor, dozer, dumper. also suitable for garage & workshop use.
- Front & rear surface may get hot during test, however, this will not affect the performance. allow to cool before the next test.
- 100 amp load suitable for testing all types of 6v / 12v lead-acid batteries upto 1000 cca (~200 ah).
- Complete diagnosis of battery condition by battery load capacity test (100a/12v, 50a/6v). starter cranking test, charging system (alternator) output test
SHOWview product -
Product Highlights
- Maximum power: 60w (automatically limits the maximum current. for example, when input is 12v, the current will be below 5a.)
- Maximum battery test statistic: 999.9ah or 9999wh (stops when one of them achieve the value)
- The fan adjusts the spinning speed automatically base on the temperature of the radiator
- The tester features an automatic power-down save function.
- Built-in five different protections for circuit safety: overheat protection, transient overpower protection, overvoltage protection, reversed polarity connecting protection, power supply with abnormal voltage protection.
SHOWview product -
-
Product Highlights
- Quick & accurate: the results of the battery load tester are based on the cca standard, which can be quickly and accurately displayed on the 1.8-inch hd lcd screen, allowing you to know the status of the battery. the clip is made of pure copper, with a strong clamp force. the red wire is connected to the positive "+", and the black wire is connected to the negative "-".
- Plug and play: it is simple to operate, just connect the clip of the battery tester to the car battery correctly and it will start working, whether the battery is in vehicle or out of vehicle, or a dead battery can be tested.
- Auto car battery tester: bm550 battery tester can test most 6v 12v 24v 100-2000 cca car batteries, support 2ah-220ah(need to enter the corresponding cca value on the battery), including regular flooded(regular battery), agm flat plate(agm tablet battery), agm spiral(agm winding battery), gel and efb batteries, battery analyzer for cars trucks suv atv boats motorcycles v...
- Multifunctional battery analyzer: bm550 car battery analyzer can delievering a quick inspect and check for battery. it can test the soh (state of health) and soc (state of charge) of the battery, easily test 100-2000 cca, internal resistance test and voltage test. with our battery tester, you can clearly know the car battery situation before driving and ensure each safe...
- Reverse connection protection: safer to use, the red wire of this battery tester is connected to the positive "+" of the car battery, and the black wire is connected to the negative "-". if you accidentally reverse the two wires, don't worry, the battery load tester will not work at this time to prevent the internal circuit from burning, which can well protect the equip...
SHOWview product
Coupon copied
