10 Best
Automotive Replacement Vacuum Hoses
-
Product Highlights- Broad operation temperature: -76f to 374f (-60c to 190c). 60 psi maximum pressure rating
- Material stability: handle extreme pressure; ultra flexible and excellent tensile strength
- Size: inner diameter 0.2 inch (5mm silicone rubber hose red); outer diameter 0.4 inch (10mm); length 6.5 feet (2 meter); wall thickness 3mm
- Reinforcement: made of high temperature premium grade silicone rubber
- Applicability: applies to general purpose air or water transportation in the engine bay
SHOWview product -
Product Highlights
- Quality material: our tubing hose is made of premium silicone, durable and high temperature resistant, possessing good plasticity and aging resistance. you can use it for a long term without any worry.
- Two-layers package: the vacuum hose is wrapped with a film, and the outside is packaged with high-quality pe bag, which can avoid the damage of product during transportation.
- Package content: you will receive a silicone vacuum tubing hose with the inner diameter of 3mm / 1/8inch, the outer diameter of 7mm / 7/25inch, the thickness of 2mm / 1/12inch and the enough length of 3m / 10ft. enough to satisfy your demands.
- Easy to use: the silicone vacuum tubing hose can be cut into suitable length easily according to your needs. the rest can be stored at the locker for the next use.
- Warm reminds: please check the size of our product carefully before buying. working temperature: -40°~180° (-40°f~356°f). working pressure: 0.3~0.9mpa. please note the maximum and minimum when using.
SHOWview product -
Product Highlights
- Vacuum caps assortment: the vacuum caps set contains 6 sizes, you can choose according to your needs, and quickly find the right caps.refer to the main drawing or description for dimensions.
- Finishing caps: they cover any scratches, burrs or distortions that may result from cutting operations. · in addition, they also provide protection against injury from sharp rod and tubing edges.
- Vacuum hose cap: the appropriate size can provide a tight fit to prevent vacuum leakage; the vacuum cover is used for manifolds, capping pipelines and hoses, while testing emission control systems, vacuum lines, diaphragms, etc; the appropriate size can also be used as an ordinary rubber cap.
- Automotive vacuum hose: in order to facilitate maintenance, we can prepare some vacuum line cap kits at home or in the car. at critical moments, he can always help you; he can help you repair the car's carburetor hose and handle the intake manifold.
- Rubber vacuum caps: constructed of durable flexible nitrile rubber, even a slightly larger pipeline can still be used conveniently; and has the characteristics of high temperature resistance, there is no need to worry about the product melting due to higher temperatures.
SHOWview product -
Product Highlights
- Application: wildly used in automotive vacuum lines, turbochargers, air intake components, etc. (fit for air and water only, not for fuel, oil and coolant).
- The vacuum hose tube is mde of high temp reinforced silicone material, which is high and low temperature resistance, high pressure resistance, flexibility, and good strength and durability.
- Silicone vacuum tubing hose line: length: 1m / 3.28ft, inner diameter: 6mm / 0.24"(d), outside diameter: 14mm / 0.55"(d), wall thickness: 4mm / 0.16"(t).
- Universal fit for most inlet and outlet systems and cooling systems of car engines. such as: for audi, for bmw, for toyota 4runner camry rav4, for chevrolet silverado, for jeep engine, etc.
- Easy to install, good for use as a replacement hose in your engines or anything that requires a vacuum tube. please note: silicone heater tube is not resistant to fuel and oil.
SHOWview product -
Product Highlights
- Application: wildly used in automotive vacuum lines, turbochargers, air intake components, etc. (fit for air and water only, not for fuel, oil and coolant).
- The vacuum hose tube is mde of high temp reinforced silicone material, which is high and low temperature resistance, high pressure resistance, flexibility, and good strength and durability.
- Silicone vacuum tubing hose line: length: 1m / 3.28ft, inner diameter: 6mm / 0.24"(d), outside diameter: 14mm / 0.55"(d), wall thickness: 4mm / 0.16"(t).
- Universal fit for most inlet and outlet systems and cooling systems of car engines. such as: for audi, for bmw, for toyota 4runner camry rav4, for chevrolet silverado, for jeep engine, etc.
- Easy to install, good for use as a replacement hose in your engines or anything that requires a vacuum tube. please note: silicone heater tube is not resistant to fuel and oil.
SHOWview product -
Product Highlights
- Application: wildly used in automotive vacuum lines, turbochargers, air intake components, etc. (fit for air and water only, not for fuel, oil and coolant).
- The vacuum hose tube is mde of high temp reinforced silicone material, which is high and low temperature resistance, high pressure resistance, flexibility, and good strength and durability.
- Silicone vacuum tubing hose line: length: 1m / 3.28ft, inner diameter: 14mm / 0.55"(d), outside diameter: 22mm / 0.87"(d), wall thickness: 4mm / 0.16"(t).
- Universal fit for most inlet and outlet systems and cooling systems of car engines. such as: for audi, for bmw, for toyota 4runner camry rav4, for chevrolet silverado, for jeep engine, etc.
- Easy to install, good for use as a replacement hose in your engines or anything that requires a vacuum tube. please note: silicone heater tube is not resistant to fuel and oil.
SHOWview product -
Product Highlights
- Application: wildly used in automotive vacuum lines, turbochargers, air intake components, etc. (fit for air and water only, not for fuel, oil and coolant).
- The vacuum hose tube is mde of high temp reinforced silicone material, which is high and low temperature resistance, high pressure resistance, flexibility, and good strength and durability.
- Silicone vacuum tubing hose line: length: 1.5m / 4.92ft, inner diameter: 12mm / 0.47"(d), outside diameter: 20mm / 0.79"(d), wall thickness: 4mm / 0.16"(t).
- Universal fit for most inlet and outlet systems and cooling systems of car engines. such as: for audi, for bmw, for toyota 4runner camry rav4, for chevrolet silverado, for jeep engine, etc.
- Easy to install, good for use as a replacement hose in your engines or anything that requires a vacuum tube. please note: silicone heater tube is not resistant to fuel and oil.
SHOWview product -
Product Highlights
- Application: wildly used in automotive vacuum lines, turbochargers, air intake components, etc. (fit for air and water only, not for fuel, oil and coolant).
- The vacuum hose tube is mde of high temp reinforced silicone material, which is high and low temperature resistance, high pressure resistance, flexibility, and good strength and durability.
- Silicone vacuum tubing hose line: length: 1.5m / 4.92ft, inner diameter: 10mm / 0.39"(d), outside diameter: 18mm / 0.71"(d), wall thickness: 4mm / 0.16"(t).
- Universal fit for most inlet and outlet systems and cooling systems of car engines. such as: for audi, for bmw, for toyota 4runner camry rav4, for chevrolet silverado, for jeep engine, etc.
- Easy to install, good for use as a replacement hose in your engines or anything that requires a vacuum tube. please note: silicone heater tube is not resistant to fuel and oil.
SHOWview product -
Product Highlights
- Application: wildly used in automotive vacuum lines, turbochargers, air intake components, etc. (fit for air and water only, not for fuel, oil and coolant).
- The vacuum hose tube is mde of high temp reinforced silicone material, which is high and low temperature resistance, high pressure resistance, flexibility, and good strength and durability.
- Silicone vacuum tubing hose line: length: 1m / 3.28ft, inner diameter: 16mm / 0.63"(d), outside diameter: 24mm / 0.94"(d), wall thickness: 4mm / 0.16"(t).
- Universal fit for most inlet and outlet systems and cooling systems of car engines. such as: for audi, for bmw, for toyota 4runner camry rav4, for chevrolet silverado, for jeep engine, etc.
- Easy to install, good for use as a replacement hose in your engines or anything that requires a vacuum tube. please note: silicone heater tube is not resistant to fuel and oil.
SHOWview product -
Product Highlights
- [function] the inner diameter hose is mainly used for conveying air and liquid in the engine or lubricating oil. it is applicable to general air or water transportation in the engine compartment.
- [specification] the working temperature is - 76 ° f~428 ° f, and the maximum pressure that can be borne is 130psi.
- [material] the vacuum hose is made of high-quality silicone material to ensure strength and durability. soft, firm and durable.
- [features] the soft wall thickness of high-performance silicone vacuum tube is 3mm. the thick wall design enables it to withstand extreme pressure, and has the characteristics of high temperature resistance, low temperature resistance and wear resistance.
- [cuttable] this silicone vacuum hose is 10 feet long and 1/4 inch inside diameter, which is enough to meet your needs. you can cut it into appropriate size according to your needs. it is flexible, flexible and easy to store. when your old vacuum hose is damaged and weathered by heat, it will be a very practical replacement accessory.
SHOWview product
Coupon copied
