4 Best
Automatic Sump Pumps
-
Product Highlights- Stainless steel pump body float switch ensures automatic cut-in and cut-out
- Suitable to be immersed in water for lifting water from the well or the pool, and the draining water from the basement.
- “pipe size 1” 1.25” & 1.5 “ fits in nozzle.
- Can be used to clean or slightly dirty water or other liquid similar to water in physical and chemical priperties.
- Max. liquid temperature: +35 degree c, max. immersion depth : 7m, max. diameter of solid particle 25mm.
- Build-in overload thermal protector with automatic reset. each pump has a float switch.
SHOWview product -
Product Highlights
- Topping up the motor unscrew the brass plugs 1 and 2, fitted on top of the motor as shown in fig. 1 below, and fill the motor with pure drinking water till water overflows from the other filling hole. gently rock the motor to release air bubbles and further top up if necessary. then replace the two plugs.
- Use the eye bolts / lifting lugs for lifting / lowering the ows using appropriate equipment. keep the wire ropes remains tied for lifting of the pump set for future. to prevent the motor from getting exposed during pumping, ensure the suction strainer is fitted above the level of the motor. this is done by fitting one end of a bend to the pump suction flange and the str...
- Sd ows motors are provided with two separate 3 core pvc insulated flat cable, each of 3 meters length. repeat the procedure for both 3 core pvc flat cables from the motor to the two cables from the control panel.
- Checking rotation of ows power up the ows and observe the discharge from the pump. next interchange any two phase wires, power up the ows and observe the discharge from the pump. in case the discharge is more after interchanging any two phase wires, then the impeller is rotating in the correct direction within the volute casing. if the discharge after interchanging any ...
- Features designed for under submerged condition water applications all rotating parts are dynamically balanced for longer bearing life and vibration free smooth operation epoxy ceramic coated in the inner parts for rust free operation fitted with quality oil seal easy for installation and no platform required designed to withstand wide voltage fluctuations non overloadi...
- The brass plug 3 mounted on the bottom of the motor, is used for draining the water from within the motor. ensure all three brass plugs are tightened to prevent leakage of water from within the motor. check for leakages before lowering the ows. use prescribed pipe sizes as mentioned on the product name plate. check the level of silt at the bottom of the well. refer fig....
SHOWview product -
Product Highlights
- Application: draining sewage water from hotels, houses, commercial buildings, complexes etc, pumping waste water in industries, tunnels and mines, pumping sewage water from stock farm and manhole sewer, sewage treatment plants, pumping municipal sewage water, septic tanks.
- Sturdy built, high efficiency 0.5 hp single phase motor ; saves energy upto 70 %; durable sewage pump
- Specifications: voltage:220v-240~50hz, input power: 400w (0.5hp), max.submersible head: 4.5m, max.flow: 7500l/h, outlet: g1-1/4", ip grade: ipx8, switch: float switch
- Features: heavy-duty bearings. safe and quiet operation. most reliable and hard-wearing. multipurpose applications. easy and cost-effective serviceability.
- Package contents: 0.5 hp sewage pump
SHOWview product
Coupon copied
