10 Best
3 Stage Snow Blowers
-
Product Highlights- 3/8" thick rubber paddle (2"w x 5"l) - (trim to fit as needed). made from styrene butadiene rubber (sbr rubber) sbr rubber with minimum tensile strength of 725 psi (5 mpa),hard rubber with a durometer of 65-75. metal strap with holes - 1 3/8" w x 3 3/4"l ,1/16" thick. bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; hex bolts,hex l...
- ☞this gap also decreases the efficiency of the impeller's ability to propel the snow up the chute resulting in less throwing distance. if you have a single-stage snow blower, or your gap is less than 1/4" or greater than 5/8", you probably don't need or can't use this fix.
- ☞product includs: 3 x rubber paddles 3 x metal straps 9 x bolts 9 x lock nuts 3 x self-tapping screws
- ☞this kit is to reduce the existing“gap”between the snow blower's impeller blades and the impeller chamber wall. the smaller the gap, the greater your machine's operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow. this "gap" allows snow and slush to slip by the blades and build up around the impeller ...
- ☞if the gap varies around the chamber wall, you must install the rubber to fit the spot where the gap is the smallest, otherwise, the rubber will fail! the rubber paddles mounted should be installed so they are barely touching. remember, any decrease in the gap between the impeller blades and the chamber wall will result in a significant improvement in operational effic...
SHOWview product -
Product Highlights
- Rubber paddle 1/4" thick(2"w x 5"l), made from styrene butadiene rubber (sbr rubber) ,sbr rubber with minimum tensile strength of 725 psi (5 mpa),hard rubber with a durometer of 65-75 ; metal strap with holes - 1 3/8" w x 3 3/4"l ,punched flat bar stainless steel materials, 1/16" thick
- The purpose of the snow blower impeller kit : this kit reduces the existing “gap” between the snow blower's impeller blades and the impeller chamber wall. the smaller the gap, the greater your machine's operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow.
- Product includs:3-rubber paddle , 3-metal straps , 9-bolts & lock nuts , 3-self-tapping screws;premium 304 stainless steel reinforcement plate & hardware
- Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; hex bolts,hex lock nuts nylon inser,self-tapping screw (#14 x 1),sheet metal screw, hex washer head self drilling, stainless steel materials
- Purchase notes:pleases make sure the part number of new replacement matches your original equipment before ordering. if you encounter any problem, feel free to let us know. we will be more than happy to reply your message within 24 hours.
SHOWview product -
Product Highlights
- Product includs:3-rubber paddle , 3-metal straps , 9-bolts & lock nuts , 3-self-tapping screws;detailed in the product pictures
- Rubber paddle 3/8" thick(2"w x 5"l), made from styrene butadiene rubber (sbr rubber) ,sbr rubber with minimum tensile strength of 725 psi (5 mpa),hard rubber with a durometer of 65-75 ; metal strap with holes - 1 3/8" w x 3 3/4"l ,punched flat bar stainless steel materials, 1/16" thick
- Universal 3/8" hd 3-blade snow blower impeller kit, for snow blower - modifies 2-stage machine
- Our screws are made of 304 stainless steel
- Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; hex bolts,hex lock nuts nylon inser,self-tapping screw (#14 x 1),sheet metal screw, hex washer head self drilling, stainless steel materials
SHOWview product -
Product Highlights
- Fit for troy-bilt 31bm63p3 (2009), 31ah55q5 (2009), 31ah64q4 (2009), 31am62n2 (2009) snow blower and for mtd 31ah65lg704 (2009), 31bm63lf704 (2009), 31am62ee706 (2009), 31bm62ke704 (2009), 31ah64fg795 (2014) mp28 snow blower.
- High quality: strong and durable, these polyurethane skid/slide shoes are made to last. they can endure the cold, is tough, resilient, and resistant to both corrosion and pitting.
- Fit for: for craftsman troy-bilt mtd yard machines snow thrower and for most 2-stage and 3-stage snow thrower.
- Fit for yard machines 31ah64eg700 (2014), 31ah64eg700 (2009), 31ah64fg700 (2014), 31ah65fh700 (2014), 31as63ee700 (2014), 31as63ef700 (2014), 31as63ef729 (2014)snow blower.
- Application: the 490-241-0010 slide shoes is the right assistant for the operation of the snow blower. with its blessing, you can easily complete the snow shoveling work.
SHOWview product -
Product Highlights
- Metal strap: metal strap with holes-35mm width x 95mm length stamped flat, 1/16 inch thick;
- Package included: 1 x rubber paddle, 1 x metal strap, 3 x bolt, 1x self tapping screw.
- Rubber paddle: 1/4" thick rubber paddle 50mm width x 127mm length;
- Bolt: bolt (5/16-18 x 1 inch coarse thread), with 5/16-18 lock nut (use 1/2 inch wrench and socket );
SHOWview product -
-
Product Highlights
- Size of rubber paddle: (5" length x 2" width)0.45" thick - size of metal strap: (3-2/3" length x 1-3/8" width) 0.072" thick
- Tired of manually cleaning snow between the impeller blades and discharge chute? try our snow blower impeller modification kit to eliminate the problem.
- Quality durable rubber pad for long time use under extreme weathers. increased snow blowing efficiency and increased snow throw distances
- This blade modification kit is designed to eliminate clogging issue by reducing the space between impeller blades and discharge chute
- Note: please match the part number with part number on the old part to ensure fitment before purchasing.
SHOWview product -
-
Product Highlights
- Product standard: rubber paddle 1/4" thick(2"w x 5"l), made from styrene butadiene rubber (sbr rubber) ,sbr rubber with minimum tensile strength of 725 psi (5 mpa),hard rubber with a durometer of 65-75 ; metal strap with holes - 1 3/8" w x 3 3/4"l ,punched flat bar stainless steel materials, 1/16" thick
- Note this modify kit is for improving the performance of two-stage blowers. for single-stage blowers or those with small (<1/4’’) or large (5/8’’) gap, this kit is probably not needed.
- Extensive use: snow blower modifies impeller kit 1/4" universal 3-blade - for modifies 2-stage machine
- Product standard: bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; hex bolts,hex lock nuts nylon inser,self-tapping screw (#14 x 1),sheet metal screw, hex washer head self drilling, stainless steel materials
- 100% quality guarantee: if you have any problems, please let us know in time. we will help you solve them within 24 hours and provide you with the best service
SHOWview product -
Product Highlights
- Fits for 2-3/4" and 3" bolt centers machines.
- Roller skid shoes for for 31bm63p3711, 31ah64q4711, 31ah55r5711, 31as63ee783, 31as63ef729 snow thrower.
- Fits for 2 and 3 stage snow throwers.
- Roller skid shoes for mtd, for troy-bilt, for yard machines, for yard-man craftsman，for remington machines and more.
- Package includes: 2 × pack roller skid shoes, 1 × primer bulb，1 ×fuel filter，1 × mounting hardware kit.
SHOWview product
Coupon copied
