10 Best
1 Hp Deep Well Pumps
-
Product Highlights- Motor phase: single phase
- Special features: stainless steel shaft of the pump set protects the pump shaft from rusting due to hard water, high grade pump castings ensures very slow rusting of pump, pump life is increases due to less rusting and wear and tear
- Material: iron
- Included components: water pump
SHOWview product -
-
Product Highlights
- Cable 5 mtr. 1 + 1 year extended warranty (24 months). no warranty for panel board
- Head range upto 120 feet with discharge up to 3 liters per second at rated head 3mtr.
- Highly durable water cooled rewindable motor. high quality bearing and castings. dynamically balanced rotors and impellers ensure vibration free performance and enhanced life
- Single phase . ac 180 - 240v. maximum power consumption 8 - 12amps.
- Copper winding. stainless steel shaft. less power consumption
- Coil burn due to dry run or improper installation / usage are not covered under warranty
SHOWview product -
Product Highlights
- Copper winding specially designed ss impeller double side carbon bush bearing for increased life
- Provided with control panel for pump operation provided with 3 meter long cable
- 1.0 hp heavy open well submersible pump brand name: green world pumps
- High quality die casting stainless steel body shaft and all fasteners stainless steel
- Power : 1 h.p. (0.75 k.w.) phase : single phase head range : 18 to 32 meter flow rate : 132 to 18 l.p.m inlet / outlet : 25 x 25 mm package contents:1-piece water pump manufacturing company name: green world industries
SHOWview product -
Product Highlights
- Topping up the motor unscrew the brass plugs 1 and 2, fitted on top of the motor as shown in fig. 1 below, and fill the motor with pure drinking water till water overflows from the other filling hole. gently rock the motor to release air bubbles and further top up if necessary. then replace the two plugs.
- Use the eye bolts / lifting lugs for lifting / lowering the ows using appropriate equipment. keep the wire ropes remains tied for lifting of the pump set for future. to prevent the motor from getting exposed during pumping, ensure the suction strainer is fitted above the level of the motor. this is done by fitting one end of a bend to the pump suction flange and the str...
- Sd ows motors are provided with two separate 3 core pvc insulated flat cable, each of 3 meters length. repeat the procedure for both 3 core pvc flat cables from the motor to the two cables from the control panel.
- Checking rotation of ows power up the ows and observe the discharge from the pump. next interchange any two phase wires, power up the ows and observe the discharge from the pump. in case the discharge is more after interchanging any two phase wires, then the impeller is rotating in the correct direction within the volute casing. if the discharge after interchanging any ...
- Features designed for under submerged condition water applications all rotating parts are dynamically balanced for longer bearing life and vibration free smooth operation epoxy ceramic coated in the inner parts for rust free operation fitted with quality oil seal easy for installation and no platform required designed to withstand wide voltage fluctuations non overloadi...
- The brass plug 3 mounted on the bottom of the motor, is used for draining the water from within the motor. ensure all three brass plugs are tightened to prevent leakage of water from within the motor. check for leakages before lowering the ows. use prescribed pipe sizes as mentioned on the product name plate. check the level of silt at the bottom of the well. refer fig....
SHOWview product -
Product Highlights
- Stainless steel shaft with carbon bush bearing. noise free operation
- Low power consumption upto 9a. discharge upto 2.5 liters per second
- Coil burn due to dry run or improper installation / usage are not covered under warranty
- Single phase ac 220v. total head 30 m (upto 100 feet). copper winding
- 5 meter cable provided with panel board, 1 no bend and instruction manual
- 1 + 1 year extended warranty (24 months). no warranty for panel board
SHOWview product -
Product Highlights
- Corrosion protection: ced coating outside the pump which protect the pump from corrosion
- Extra long cable: very long 4 meter wire for connection.
- Strong body: made from highly graded casting & stainless steel material
- Standard material: high standard stainless steel nuts & ball
SHOWview product -
Product Highlights
- Applications: 1. domestic use, over head tanks 2. minor irrigation 3. hotels and appartments 4. gardening 5. artificial fountains sailent features 1. water lubricated thrust bearings to withstand high axial load. 2. high grade oil seal prevents the entry of sand and dust particles into the motor.
SHOWview product -
-
Coupon copied
